A155
FX6 Series●0.8mm Pitch Stacking Height 5 to 9mm Connector
BPrecautions
3. Board to Board Size
The board to board size of the male/female connector shown in the application pattern doesn't include the solder paste
thickness. Thus, after the connector is mounted on the board, consider that the board to board size will be widened in
proportion to the solder paste thickness.
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 1.7mm. Please use the products as to set the clearance within 1.0mm
between the header and the receptacle in the mating process.
2. Mounting Temperature Profile (Reference)
Soldering Time
(220ç min.)
Pre-heating time
(150 to 200ç)
Time (Second)
(ç)
Temperature
150ç
200ç
220ç
140
180
220
0
160
200
(MAX250ç)
240
260
90 to 120s
MAX 60s
HRS test conditions
Test boardGlass epoxy 110mm∞55mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Nov.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Powered by TCPDF (www.tcpdf.org)
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Powered by TCPDF (www.tcpdf.org)
