This aluminized moisture barrier bag is designed to provide a static safe
environment for sensitive electronic devices. A stronger polyester layer helps
to prevent sharp trays from puncturing the bag. The bags are heat sealable
and suitable for vacuum packaging. Bags are printed with ESD and moisture
warning symbols and a lot code for traceability.
SCS Moisture Barrier Bags Dri-Shield
®
2700 are manufactured from a
laminate of multiple layers of aluminized polyester and polyethylene. Polyester
provides puncture resistance. Metal layers are intended to provide shielding of
Electrostatic Discharge (ESD) and to help minimize the penetration of electric
eld.
DRAWING
NUMBER
Dri-Shield
®
2700
DATE
April
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
DRI-SHIELD
®
2700 MOISTURE BARRIER BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
Moisture Barrier Bag Dri-Shield
®
2700
Specifications and procedures subject to change without notice.
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualied Product
Listing under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
Open Top Bag ZipTop Bag
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250
Seal width +/- 0.125
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541
Made in the United States of America with Globally Sourced Materials.
Physical Typical Value Testing Method
Moisture Vapor
Transmission Rate
(MVTR)
< 0.030 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030
Tensile Strength
6550 PSI, 45 MPa
ASTM D882
Puncture Resistance
30 lbs, 133 N
MIL-STD-3010 Method 2065
Seal Strength
20 lbs, 89 N
ASTM D882
Thickness
7 mils, 0.007" ±10%
MIL-STD-3010 Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
Surface Resistance -
Interior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
EMI Attenuation
45 dB
1 to 10 GHz
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Value
Temperature 400°F, 204°C
Time
0.6 – 4.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
Tolerance: Width -0, +1/4"
Length ± 1/8" Oset 0 to 1/4"
Seal width 3/8" with a tolerance of ± 1/8"
Note: Standard bag markings shown
above are not to scale.
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
Desiccants - To Absorb Moisture
Humidity Indicator Cards - To Monitor Performance
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
