VSC8211XVW

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability

whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction

with mission-critical equipment or applications. Any performance specifi cations are believed to be reliable but are not verifi ed, and Buyer must conduct and complete all performance and other testing of the products, alone

and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifi cations or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability

of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.

Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in

this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

U

R

or

R

R

R

R K

R

R

TBI

• iSCSI and TOE LOM

• Triple speed copper GBIC/SFP modules

• 100BASE-FX switch ports and modules

• Backplanes

Specifi cations

• Steady state power consumption

(1000BASE-T) including SerDes

• Power consumption in ActiPHY™ low

power state

• Cable link length supported in 1000BASE-T

• Core supply voltage

• Crystal parallel resonant frequency

(±100ppm tolerance)

The VSC8211 is ideal for Media Converter and 100BASE-FX

applications. Its low power consumption and patented line driver

technology reduce the cost and complexity of Gigabit Ethernet system

designs.

The VSC8211’s integrated 1.25 Gbps SerDes and Auto-Media Sense™

feature allow system designers to support Category 5 twisted pair, fi ber

optic, and backplane interfaces from a single device.

termination resistors

• Supports PICMG 2.16 and 3.0 Ethernet backplanes at

approximately 500 mW

• Supports Cisco SGMII v 1.7 and 1000BASE-X MACs, RGMII

and RTBI v 1.3 & v 2.0 (2.5 V & 3.3 V)

• User-programmable RGMII timing compensation

• High performance 1.25 Gbps SerDes

• Auto-media sense feature detects and confi gures to support

either copper or fi ber media

• Compliant with IEEE 802.3 (10BASE-T, 100BASE-TX,