NL17SH02
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
IN
DC Input Voltage −0.5 to +7.0 V
V
OUT
DC Output Voltage V
IN
= 0
High or Low State
−0.5 to +7.0
−0.5 to V
CC
+0.5
V
I
IK
DC Input Diode Current V
IN
< GND −20 mA
I
OK
DC Output Diode Current V
OUT
< GND, V
OUT
> V
CC
±20 mA
I
OUT
DC Output Source/Sink Current ±25 mA
I
CC
DC Supply Current per Supply Pin 50 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
V
ESD
ESD Withstand Voltage Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
>2000
>150
N/A
V
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125°C (Note 5) ±100 mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Characteristics Min Max Unit
V
CC
Positive DC Supply Voltage 1.65 5.5 V
V
IN
Digital Input Voltage 0.0 5.5 V
V
OUT
Output Voltage 0.0 V
CC
V
T
A
Operating Temperature Range −55 +125 °C
Dt / DV
Input Transition Rise or Fail Rate V
CC
= 3.3 V ± 0.3 V
V
CC
= 5.0 V ± 0.5 V
0
0
100
20
ns/V
