2.3 Offered options for customer projects
Customer specified strings and IDs (MID, OID, PNM, PRV)
Customer specified capacities
Preload service
Customized printing and lasering
Permanent write protected (ROM) with preloaded software
Default speed mode
Diagnostic documentation for Card Status Register access or vendor command extension values
…
Disclaimer:
No part of this document may be copied or reproduced in any form or by any means, or transferred to any third
party, without the prior written consent of an authorized representative of Swissbit AG (“SWISSBIT”). The information in
this document is subject to change without notice. SWISSBIT assumes no responsibility for any errors or omissions that
may appear in this document, and disclaims responsibility for any consequences resulting from the use of the
information set forth herein. SWISSBIT makes no commitments to update or to keep current information contained in
this document. The products listed in this document are not suitable for use in applications such as, but not limited to,
aircraft control systems, aerospace equipment, submarine cables, nuclear reactor control systems and life support
systems. Moreover, SWISSBIT does not recommend or approve the use of any of its products in life support devices or
systems or in any application where failure could result in injury or death. If a customer wishes to use SWISSBIT
products in applications not intended by SWISSBIT, said customer must contact an authorized SWISSBIT representative to
determine SWISSBIT willingness to support a given application. The information set forth in this document does not
convey any license under the copyrights, patent rights, trademarks or other intellectual property rights claimed and
owned by SWISSBIT. The information set forth in this document is considered to be “Proprietary” and “Confidential”
property owned by SWISSBIT.
ALL PRODUCTS SOLD BY SWISSBIT ARE COVERED BY THE PROVISIONS APPEARING IN SWISSBIT’S TERMS AND CONDITIONS OF SALE
ONLY, INCLUDING THE LIMITATIONS OF LIABILITY, WARRANTY AND INFRINGEMENT PROVISIONS. SWISSBIT MAKES NO WARRANTIES
OF ANY KIND, EXPRESS, STATUTORY, IMPLIED OR OTHERWISE, REGARDING INFORMATION SET FORTH HEREIN OR REGARDING THE
FREEDOM OF THE DESCRIBED PRODUCTS FROM INTELLECTUAL PROPERTY INFRINGEMENT, AND EXPRESSLY DISCLAIMS ANY SUCH
WARRANTIES INCLUDING WITHOUT LIMITATION ANY EXPRESS, STATUTORY OR IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
©2016 SWISSBIT AG All rights reserved.