MURHF860CTG

© Semiconductor Components Industries, LLC, 2016
July, 2016 − Rev. 6
1 Publication Order Number:
MURHF860CT/D
MURHF860CT
Switch-mode Power
Rectifier
These state-of-the-art Switch−mode power rectifiers are designed
for use in switching power supplies, inverters and as free wheeling
diodes.
Features
Ultrafast 35 Nanosecond Recovery Times
150°C Operating Junction Temperature
Electrically Isolated. No Isolation Hardware Required
Epoxy Meets UL 94 V−0 @ 0.125 in
High Temperature Glass Passivated Junction
High Voltage Capability to 600 V
Low Leakage Specified @ 150°C Case Temperature
This is a Pb−Free Package*
Mechanical Characteristics:
Case: Epoxy, Molded
Weight: 1.9 Grams (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds
MAXIMUM RATINGS (Per Leg)
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
600 V
Average Rectified Forward Current
(Rated V
R
, T
C
= 120°C) Total Device
I
F(AV)
4.0
8.0
A
Peak Repetitive Forward Current
(Rated V
R
, Square Wave,
20 kHz, T
C
= 120°C)
I
FM
16 A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
I
FSM
100 A
Operating Junction and Storage Tempera-
ture Range
T
J
, T
stg
−65 to +150 °C
THERMAL CHARACTERISTICS (Per Leg)
Rating
Symbol Value Unit
Max Thermal Resistance, Junction−to−Case
R
q
JC
4.1 °C/W
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Device Package Shipping
ORDERING INFORMATION
ULTRAFAST RECTIFIER
8.0 AMPERES, 600 VOLTS
2
3
1
www.onsemi.com
MURHF860CTG TO−220
(Pb−Free)
50 Units/Rail
ISOLATED TO−220
CASE 221AH
3
1
2
MARKING
DIAGRAM
A = Assembly Location
Y = Year
WW = Work Week
UH860 = Device Code
G = Pb−Free Package
AKA = Diode Polarity
AYWW
UH860G
A K A
MURHF860CT
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 1)
(i
F
= 4.0 A, T
C
= 150°C)
(i
F
= 4.0 A, T
C
= 25°C)
v
F
2.5
2.8
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, T
C
= 150°C)
(Rated DC Voltage, T
C
= 25°C)
i
R
500
10
mA
Maximum Reverse Recovery Time
(I
F
= 1.0 A, di/dt = 50 A/ms)
t
rr
35 ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%
MURHF860CT
www.onsemi.com
3
PACKAGE DIMENSIONS
TO−220 FULLPACK, 3−LEAD
CASE 221AH
ISSUE F
DIM MIN MAX
MILLIMETERS
D 14.70 15.30
E 9.70 10.30
A 4.30 4.70
b 0.54 0.84
P 3.00 3.40
e
L1 --- 2.80
c 0.49 0.79
L 12.50 14.73
b2 1.10 1.40
Q 2.80 3.20
A2 2.50 2.90
A1 2.50 2.90
H1 6.60 7.10
E
Q
L1
b2
e
D
L
P
123
b
SEATING
PLANE
A
A1
H1
A2
c
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR UNCONTROLLED IN THIS AREA.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH AND GATE
PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO
EXCEED 0.13 PER SIDE. THESE DIMENSIONS ARE TO BE
MEASURED AT OUTERMOST EXTREME OF THE PLASTIC BODY.
5. DIMENSION b2 DOES NOT INCLUDE DAMBAR PROTRUSION.
LEAD WIDTH INCLUDING PROTRUSION SHALL NOT EXCEED 2.00.
6. CONTOURS AND FEATURES OF THE MOLDED PACKAGE BODY
MAY VARY WITHIN THE ENVELOP DEFINED BY DIMENSIONS A1
AND H1 FOR MANUFACTURING PURPOSES.
2.54 BSC
M
0.14
M
A
A
B
C
E/2
M
0.25
M
AB
3X
C
3X
B
NOTE 3
FRONT VIEW
SIDE VIEW
SECTION D−D
ALTERNATE CONSTRUCTION
SECTION A−A
A
NOTE 6
A
DD
NOTE 6
H1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MURHF860CT/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative

MURHF860CTG

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Rectifiers 600V 8A Ultrafast
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet