NL27WZ17
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Characteristics Value Units
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
I
DC Input Voltage −0.5 ≤ V
I
≤ +7.0 V
V
O
DC Output Voltage, Output in Z or LOW State (Note 1) −0.5 ≤ V
O
≤ +7.0 V
I
IK
DC Input Diode Current, V
I
< GND −50 mA
I
OK
DC Output Diode Current, V
O
< GND −50 mA
I
O
DC Output Sink Current ±50 mA
I
CC
DC Supply Current per Supply Pin ±100 mA
I
GND
DC Ground Current per Ground Pin ±100 mA
T
STG
Storage Temperature Range −65 to +150 °C
P
D
Power Dissipation in Still Air 200 mW
q
JA
Thermal Resistance 333 °C/W
T
L
Lead Temperature, 1 mm from Case for 10 s 260 °C
T
J
Junction Temperature under Bias +150 °C
V
ESD
ESD Withstand Voltage
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
> 2000
150
N/A
V
I
Latch−U
p
Latch−Up Performance
Above V
CC
and Below GND at 85°C (Note 5) ±500
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. I
O
absolute maximum rating must be observed.
2. Tested to EIA/JESD22−A114−A
3. Tested to EIA/JESD22−A115−A
4. Tested to JESD22−C101−A
5. Tested to EIA/JESD78
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Units
V
CC
Supply Voltage
Operating
Data Retention Only
1.65
1.5
5.5
5.5
V
V
I
Input Voltage 0 5.5 V
V
O
Output Voltage (High or LOW State) 0 5.5 V
T
A
Operating Free−Air Temperature −55 +125 °C
Dt/DV
Input Transition Rise or Fall Rate
V
CC
= 2.5 V ±0.2 V
V
CC
= 3.0 V ±0.3 V
V
CC
= 5.0 V ±0.5 V
0
0
0
No Limit
No Limit
No Limit
ns/V
ORDERING INFORMATION
Device Package Shipping
†
NL27WZ17DFT2G SC−88 / SOT−363 / SC−70−6
(Pb−Free)
3000 / Tape & Reel
NLV27WZ17DFT2G* SC−88 / SOT−363 / SC−70−6
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.