MC74HC4020A
http://onsemi.com
3
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage (Referenced to GND) – 0.5 to + 7.0 V
V
in
DC Input Voltage (Referenced to GND) – 0.5 to V
CC
+ 0.5 V
V
out
DC Output Voltage (Referenced to GND) – 0.5 to V
CC
+ 0.5 V
I
in
DC Input Current, per Pin ± 20 mA
I
out
DC Output Current, per Pin ± 25 mA
I
CC
DC Supply Current, V
CC
and GND Pins ± 50 mA
P
D
Power Dissipation in Still Air Plastic DIP†
SOIC Package†
TSSOP Package†
750
500
450
mW
T
stg
Storage Temperature Range – 65 to + 150
_C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds
Plastic DIP, SOIC or TSSOP Package
260
_C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress
ratings only. Functional operation above the Recommended Operating Conditions is not implied.
Extended exposure to stresses above the Recommended Operating Conditions may affect device
reliability.
†Derating — Plastic DIP: – 10 mW/_C from 65_ to 125_C
SOIC Package: – 7 mW/_C from 65_ to 125_C
TSSOP Package: - 6.1 mW/_C from 65_ to 125_C
For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High-Speed CMOS Data Book (DL129/D).
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
DC Supply Voltage (Referenced to GND) 2.0 6.0 V
V
in
, V
out
DC Input Voltage, Output Voltage (Referenced to
GND)
0 V
CC
V
T
A
Operating Temperature Range, All Package Types – 55 + 125
_C
t
r
, t
f
Input Rise/Fall Time V
CC
= 2.0 V
(Figure 1) V
CC
= 3.0 V
V
CC
= 4.5 V
V
CC
= 6.0 V
0
0
0
0
1000
600
500
400
ns
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high-impedance cir‐
cuit. For proper operation, V
in
and
V
out
should be constrained to the
range GND v (V
in
or V
out
) v V
CC
.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or V
CC
).
Unused outputs must be left open.
