SSRM-600D45

1
SSRM Series Solid State Relays
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Dimensions are shown for reference
purposes only. Specifications and
availability subject to change.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080208
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Issued 4-09
www.tycoelectronics.com
1
Sample Part Number
SSRM -600 A
1. Basic Series: SSRM = Solid State Relay with Integral Heatsink for DIN Rail Mounting
55
2. Line Voltage: 600 = 48 - 660 VAC
3. Input Type & Voltage: A = 90 - 140VAC
D = 4 - 32VDC
4. Maximum Switching Rating/Output: 45 = 45.0A rms
55 = 55.0A rms
65 = 65.0A rms
Ordering Information
Engineering Data
Form: 1 Form A (SPST-NO).
Duty: Continuous.
Isolation: 4,000V rms input-to-output-to-ground.
Insulation Resistance: 10
9
Ohms, minimum, at 500VDC.
Capacitance: 8.0 pf maximum (input to output).
Temperature Range:
Storage: –40°C to +125°C
Operating: –40°C to + 80°C
Case and Mounting: Refer to outline dimension drawing.
Termination:
Control: Finger safe (IP20) screw clamps accepting
wire size up to #12 AWG (2.5 mm).
Load: Finger safe (IP20) screw clamps accepting
wire size up to #8 AWG (3.8 mm).
Ground: #10 screw with 5/16 in. hex/slottted head.
Installation Spacing: Minimum 0.8 in (20 mm) space between units.
Approximate Weight: 16.9 oz. (479 g).
Features
• DIN mount design with integral heatsink.
• Choice of 45, 55 or 65A rms inverse-parallel connected SCR output.
• 48 - 660VAC output.
• 4 -32VDC or 90 - 140Vrms input control.
• 4,000V rms optical isolation.
• Green LED input status indicator.
• Finger-safe (IP20) screw clamp terminals for load and control.
• Ground terminal.
Input Specifications
Parameter
Conditions
Control Voltage Range V
Must Release Voltage V (Min.)
Input Current (Max.)
4.0 - 32 VDC
4.0 VDC
1.0 VDC
30 mA
Must Operate Voltage V (Min.)
IN
IN
IN(OP)
IN(REL)
DC Control Units
90 - 140 Vrms
90 Vrms
10 Vrms
AC Control Units
@ 25°C
Reverse Voltage V (Max.)
32 VDC
@ 25°C
@ 25°C
@ 25°C
@ 25°C
Input Current (Typ.) 14 mA @ 5 VDC15 mA @ 120 Vrms
@ 25°C
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
SSRM-600A45 SSRM-600A55 SSRM-600A65
SSRM-600D45 SSRM-600D55 SSRM-600D65
File E29244
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to confirm the product meets the
requirements for a given application.
SSRM series
45-65A DIN Mount Solid State Relay
With Paired SCR Output, Integral Heatsink
2
SSRM Series Solid State Relays
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Dimensions are shown for reference
purposes only. Specifications and
availability subject to change.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080208
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
3.0
(76.2)
2.5
(63.5)
3.0
(76.2)
3.5
(88.9)
4.3
(109.2)
.9
(22.9)
1.75
(44.5)
0.75
(19.1)
1.0
(25.4)
OUTPUT
INPUT
I
N
P
U
T
S
T
A
T
U
S
MOUNTING HOLE
0.17 (4.3) DIA.
BLACK
ANODIZED
ALUMINUM
HEATSINK
MOUNTING SLOT
0.17 x 0.20 (4.3 x 5.1)
Outline Dimensions
Electrical Characteristics (Thermal Derating Curves)
*See Thermal Derating Curves.
Parameter Conditions Units 45A Rated Units 65A Rated Units
Load Voltage Range V
Repetitive Blocking Voltage (Min.)
I t Rating (Max.)
A Sec.
V rms
V/µs
ms
ms
Turn-Off Time (Max.)
I = Max.
2
Turn-On Time (Max.)
L
L
48 - 660
Single Cycle Surge Current (Min.)
Load Current Range I *
Leakage Current (Off-State) (Max.)
Static dv/dt (Off-State) (Min.)
Load Power Factor Rating (Min.)
L
t = 8.3 ms
2
f = 60 Hz.
f = 47 - 63 Hz.
f = 60 Hz.
I = Max.
L
f = 60 Hz. V = 600Vrms
V peak
A rms
A peak
mA rms
On-State Voltage Drop (Max.)
V peak
1,200
0.25 - 65.0
±1200
6,000
1.0
1.7
500
L
0.5
55A Rated Units
48 - 660
1,000
0.25 - 55.0
±1200
4,150
1.0
1.7
500
0.5
48 - 660
8.3 for DC Input Models, 10.0 for AC Input Models
8.3 for DC Input Models, 40.0 for AC Input Models
625
0.15 - 45.0
±1200
1,620
1.0
Thermal Resistance Junction to Case R (Max.) °C/W 0.280.310.63
1.7
500
0.5
V = Max.
L
θ J–C
Output Specifications (@ 25° C, unless otherwise specified)
40
30
50
60
20
10
Ambient Temperature (ºC)
Output Current (Arms)
45 A
60
45
75
90
30
15
Ambient Temperature (ºC)
Output Current (Arms)
55 A
60
45
75
90
30
15
Ambient Temperature (ºC)
Output Current (Arms)
65 A
50 60 70 80
20 30 4010
50 60 70 80
20 30 4010
50 60 70 80
20 30 4010
Disclaimer
While Tyco Electronics has made every reasonable effort to ensure the
accuracy of the information in this document, Tyco Electronics does not
guarantee that it is error-free, nor does Tyco Electronics make any other
representation, warranty or guarantee that the information is accurate,
correct, reliable or current.
Tyco Electronics reserves the right to make any adjustments to the
information contained herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties regarding the information
contained herein, including, but not limited to, any implied warranties of
merchantability or fitness for a particular purpose.
The dimensions in this catalog are for reference purposes only and are
subject to change without notice. Specifications are subject to change
without notice. Consult Tyco Electronics for the latest dimensions and
design specifications.
Recommended Torque Range for Terminal Screws:
Control: 5 - 6 in lb (0.6 - 0.7 Nm).
Output: 10 - 15 in lb (1.1 - 1.7 Nm).
Catalog 8-1773454-5
Issued 4-09
www.tycoelectronics.com
© 2009 by Tyco Electronics Corporation. All Rights Reserved.
TE logo and Tyco Electronics are trademarks.

SSRM-600D45

Mfr. #:
Manufacturer:
TE Connectivity
Description:
Solid State Relays - Industrial Mount SPST-NO 4-32VDC 45A SS RELAY
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union