1.5 GHz, Ultrahigh Speed Op Amp
Data Sheet
AD8000
Rev. C Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no re-
sponsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2016 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
High speed
1.5 GHz, −3 dB bandwidth (G = +1)
650 MHz, full power bandwidth (G = +2, V
O
= 2 V p-p)
Slew rate: 4100 V/μs
0.1% settling time: 12 ns
Excellent video specifications
0.1 dB flatness: 170 MHz
Differential gain: 0.02%
Differential phase: 0.01°
Output overdrive recovery: 22 ns
Low noise: 1.6 nV/√Hz input voltage noise
Low distortion over wide bandwidth
75 dBc SFDR at 20 MHz
62 dBc SFDR at 50 MHz
Input offset voltage: 1 mV typical
High output current: 100 mA
Wide supply voltage range: 4.5 V to 12 V
Supply current: 13.5 mA
Power-down mode
APPLICATIONS
Professional video
High speed instrumentation
Video switching
IF/RF gain stage
CCD imaging
GENERAL DESCRIPTION
The AD8000 is an ultrahigh speed, high performance, current
feedback amplifier. Using Analog Devices, Inc., proprietary
eXtra Fast Complementary Bipolar (XFCB) process, the ampli-
fier can achieve a small signal bandwidth of 1.5 GHz and a slew
rate of 4100 V/μs.
The AD8000 has low spurious-free dynamic range (SFDR) of
75 dBc at 20 MHz and input voltage noise of 1.6 nV/√Hz. The
AD8000 can drive over 100 mA of load current with minimal
distortion. The amplifier can operate on +5 V to ±6 V. These
specifications make the AD8000 ideal for a variety of applica-
tions, including high speed instrumentation.
With a differential gain of 0.02%, differential phase of 0.01°, and
0.1 dB flatness out to 170 MHz, the AD8000 has excellent video
specifications, which ensure that even the most demanding
video systems maintain excellent fidelity.
CONNECTION DIAGRAMS
05321-001
POWER DOWN
FEEDBACK
–IN
+IN
OUTPUT
+V
S
NC
–V
S
AD8000
TOP VIEW
(Not to Scale)
NOTES
1. NC = NO CONNECT.
2. THE EXPOSED PADDLE IS CONNECTED TO GROUND.
3
4
1
2
6
5
8
7
Figure 1. 8-Lead AD8000, 3 mm × 3 mm LFCSP (CP-8-13)
05321-002
NOTES
1. NC = NO CONNECT.
2. THE EXPOSED PADDLE IS CONNECTED TO GROUND.
FEEDBACK
1
–IN
2
+IN
3
–V
S
4
POWER DOWN
8
+V
S
7
OUTPUT
6
NC
5
AD8000
TOP VIEW
(Not to Scale)
Figure 2. 8-Lead AD8000 SOIC_N_EP (RD-8-1)
The AD8000 power-down mode reduces the supply current to
1.3 mA. The amplifier is available in a tiny 8-lead LFCSP package,
as well as in an 8-lead SOIC package. The AD8000 is rated to work
over the extended industrial temperature range (−40°C to +125°C).
A triple version of the AD8000 (AD8003) is underdevelopment.
–7
–6
–5
–4
–3
–2
–1
0
1
2
3
NORMALIZED GAIN (dB)
05321-003
FREQUENCY (MHz)
1 10010 1000
V
S
= 5V
R
L
= 150
V
OUT
= 2V p-p
G = +2, R
F
= 432
Figure 3. Large Signal Frequency Response