B65
Staggered Connector Directly Mounted on Board
HIF2C Series
■ Features
1. Directly Mounted on Board
This connector can be directly mounted on the board
using 1.27mm pitch flat cable.
2. Variation in Number of Contacts
The number of contacts contains 10, 16, 20, 26, 30, 34,
40, 50, and 60 contacts.
3. Low Profile Type
The connector height is lower than that of the HIF2E series.
4. Applicable Cable
The applicable cable is UL2651 AWG#28 flat cable (7
cores./0.127mm, jacket dia. :0.8 to 1.0mm).
Rating
Current rating: 1A
Voltage rating: 200V AC
Operating Temperature Range:–55 to +85ç (Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to +60ç(Note 2)
Storage Humidity Range:40 to 70% (Note 2)
■ Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■ Material
Part Material Finish Remarks
Insulator
Contact
PBT
Beryllium copper
Black
UL94V-0
■ Ordering Information
HIF2C - * DT - 1.27 R
1 2 43
Series Name: HIF 2C
Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60
Contact alignment: DT : staggered
Contact Pitch: 1.27mm
Connection type : R : ribbon cable
1
2
3
■ Applications
Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc.
---------------
Gold plated over nickel underplated
Contact area
5
4
5
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
(–65ç: 30 minutes ➝15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1μs or more
Insulation resistance: 1000M ohms min.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
1.
Insulation Resistance
2.
Withstanding voltage
3.
Contact Resistance
4. Vibration
5.
Humidity (Steady state)
7. Resistance to
Soldering heat
6.
Temperature Cycle
Item Specification Condition
