PW180KB
Power over Ethernet IEEE802.3af Compliant
Power over Ethernet (PoE) / SMPS
Voltage +48VDC Typical, 44V to 57V
Load Regulation +/-4%, 44V to 57V
Ripple and Noise f < 500kHz 500mVp-p
500Hz-150kHz 200mVp-p
150kHz-500kHz 150mVp-p
500kHz-1MHz 100mVp-p
Transient Response 0.5ms for 50%
Load change Typical
Pin Assignment (see page 2)
Output Specifications
Voltage 100-250VAC -10%, +6%
Line Frequency 47-63Hz
Input Current 90VAC Input 0.5A max.
Protection Internal Primary Current
Fuse, Inrush Limiting
Input Specifications
Power Mode LED Amber - Power ON
(Two colors) / Detection Mode
Green - Injecting Full Power
/ Power Up Mode
LED Indicator
Topology Switching-Fixed
Frequency Flyback
Dielectric 3,000VAC or 4,250VDC
Withstand Primary-Secondary
Output Current 350mAdc min.
Inrush Current 450mAdc max.
Overload Current Detection (15.4W/Vport)min. /
400mA max.
Overload Time Limit 50-75ms
Short Circuit Protection 400-450mA max.
Continuous Output Power 15.4W min.
Average over 1 second.
Approvals and UL60950-1, IEC/EN60950-1
Safety Standards EMC : EN55022 / 55024 / 61000
Weight 5.95 ounces, 170 Grams
Leakage Current Less than 0.75mA at
265VAC 50Hz
Spacing 6.4mm Primary-Secondary
Case and Dimension Desktop Style
3.98L x 2.40W x 1.35H (in)
101.0L x 61.5W x 34.2H (mm)
Case Material Black 94V0 Polycarbonate
Cord and Connectors Dual RJ45 Jacks built into
the enclosure.
General Specifications
Specifications
3 Year Warranty
• PoE Injector and Power Supply in One Unit
• Universal Input 100 to 250 VAC
• Desktop Style Single Output
• Ideal for Midspan Applications
• Regulated Output with Low Ripple
• Meets Safety Agency Requirements
• Complies with EMI/RFI Regulations
• CE Compliant
• Impact Resistant Polycarbonate Enclosure
• Private Label Marking Available
• Modified and Custom Designs Also Available
International Safety Standard Approvals
SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com