(3/3)
005-03 / 20111003 / e4b3_cs.fm
• All specifications are subject to change without notice.
TAPING DIMEMSIONS
VERTICAL KINK LEAD TYPE
Item
Symbol
Dimensions
(mm)
Remarks
V1 V2 V3
Body diameter D Depends on the specification of each product.
Body thickness T Depends on the specification of each product.
Lead-wire diameter ød 0.6±0.05 0.6±0.05 0.6±0.05
Pitch of component P 12.7±1.0 15.0±1.0 30.0±1.0 Including the slant of body
Feed hole pitch P
0 12.7±0.3 15.0±0.3 15.0±0.3 Excepting the tape splicing part
Feed hole center to lead P
1 3.85±0.7 3.75±0.7 3.75±0.7
Feed hole center to component
center
P
2 6.35±1.3 7.5±1.3 7.5±1.3
Lead-to lead distance F 5+0.8, –0.2 7.5±0.8 7.5±0.8 Measuring point is bottom kink
Component alignment ∆h 0±2.0 0±2.0 0±2.0 Including the slanting body due to bending lead-wire
Tape width W 18.0+1.0, –0.5 18.0+1.0, –0.5 18.0+1.0, –0.5
Adhesive tape width W
0 11.5min. 11.5min. 11.5min.
Hole position W
1 9.0±0.5 9.0±0.5 9.0±0.5
Adhesive tape position W
2 3.0max. 3.0max. 3.0max. Adhesive tape do not stick out the tape
Bottom of kink from tape center H
0 16.0+1.5, –0.5 16.0+1.5, –0.5 16.0+1.5, –0.5
Height of body from tape center H
1 46.0max. 46.0max. 46.0max.
Lead-wire protrusion 1.0max. 1.0max. 1.0max.
Feed hole diameter D
0 4.0±0.2 4.0±0.2 4.0±0.2
Total tape thickness t 0.6±0.3 0.6±0.3 0.6±0.3 Do not including adhesive tape
Length of snipped lead L 11.0max. 11.0max. 11.0max.
Coating on lead C 4.0max. 4.0max. 4.0max.
Height of kink A 4.0max. 4.0max. 4.0max. Measuring point is bottom kink
Spring action S 2.0max. 2.0max. 2.0max.
P
P2
D
P0
D0
ød
A
H
0
W
H1
W1
T
∆h ∆h
S
H0 C
L
t
W0 W2
FP1
V1, V2
P
P2
D
P0
ød
A
H
0
W
H1
W1
T
∆h ∆h
S
H0 C
L
t
W0 W2
FP1
D0
V3
• For more information about products with other capacitance or other data, please contact us.
