OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC802ALP3ETR

P1-P3P4-P6P7-P7
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
3
HMC80 2ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Input IP3 vs. Frequency
Input IP3 vs. Frequency
(Low Frequency Detail)
Input Power for 1 dB Compression
Truth Table
Control Voltage
Bias Voltage & Current
Vdd = +5 Vdc ± 10%
Vdd
(Vdc)
Idd ( Typ.)
(mA)
4.5 0.32
5.0 0.33
5.5 0.34
State Bias Condition
Low 0 to +0.8V @ -1 µA Typ.
High +2 to +5V @ 30 µA Typ.
Note: Vdd = +5V
Control Voltage Input
Attenuation State
RF1 - RF2
V1
High Reference Insertion Loss
Low 20 dB
20
30
40
50
60
70
024681012
INSERTION LOSS
20 dB
IP3 (dBm)
FREQUENCY (GHz)
20
30
40
50
60
70
0 0.1 0.2 0.3 0.4 0.5
INSERTION LOSS
20 dB
IP3 (dBm)
FREQUENCY (GHz)
Input Power for 0.1 dB Compression
(Low Frequency Detail)
0
5
10
15
20
25
30
35
40
0 0.1 0.2 0.3 0.4 0.5
P0.1dB INPUT POWER (dBm)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
0123456789101112
P0.1dB INPUT POWER (dBm)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
4
HMC80 2ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Absolute Maximum Ratings
Outline Drawing
RF Input Power (DC - 10 GHz) +29.3 dBm
Control Voltage Range (V1) -1 to Vdd + 1V
Bias Voltage (Vdd) +7 Vdc
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 12 mW/°C above 85 °C)
0.84 W
Thermal Resistance
(channel to ground paddle)
77.4 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC802ALP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL3
[1]
H802A
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PAT TERN.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
5
HMC80 2ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1 Vdd Supply Voltage.
2, 4, 9, 11 GND
These pins and the exposed ground paddle
must be connected to RF/DC ground.
3, 10 RF1, RF2
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
Select value based on lowest frequency of operation.
5, 7, 8 ACG1, ACG2, ACG3
External capacitor to ground is required. Select value for
lowest frequency of operation. Place capacitor as close
to pins as possible.
6, 12, 13,
15, 16
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
14 V1 See truth table and control voltage table.
Application Circuit
P1-P3P4-P6P7-P7

HMC802ALP3ETR

Mfr. #:
Buy HMC802ALP3ETR
Manufacturer:
Analog Devices Inc.
Description:
Attenuators DATT 1BIT 20dB DC-10GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet