PGD Series ESD Suppressor
With similar performance features as the surface mount ESD products,
the connector array products provide the first line of defense against
ESD events. For use in standard D-Subminiatures, these suppressors
intercept the ESD pulses before they enter the electronic equipment.
The pulses are shunted to the grounded shell of the connector and kept
off of the circuit board. The connector configuration takes up zero board
space and can also be used as a retrofit solution in cases where the
ESD problem was identified after the board design was complete.
Electrical Characteristics:
• Capacitance <2 pF
1
• Leakage Current <0.1µA
2
• Off state Resistance 10 MΩ
2
• Clamping Voltage 100V3, typical
• Operating Voltage 24 VDC
• Peak Current 45A, at 15 kV
• Bi-directional
• Product Rated for 10,000 cycles
PHYSICAL SPECIFICATIONS:
Body Material:
Polyimide
Terminations: Spring contacts
Voltage Variable Material: Littelfuse polymeric formula.
Soldering Parameters:
• Press-in fitting, soldering not necessary.
Packaging: Bulk, bagged and tagged.
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature:
-65°C to 125°C
Vibration: Withstands 10-55Hz per MIL-STD-202F,
Method 201A and 10-2000Hz at 20 G’s per
MIL-STD-202F, Method 204D, Condition D.
Thermal Shock: Withstands 5 cycles of -50°C to 125°C
ORDERING INFORMATION:
1
Tested at 1 Megahertz
2
Tested at 5 VDC
3
Tested at 8 kV, Direct Contact, IEC 61000-4-2 ESD Waveform
Catalog Mounting Number Pin
Number Option of Pins Size (in.)
PGD009S030BSA01 90° Angle 9 0.018 - 0.028
PGD009S030CSA01 90° Angle 9 0.030 - 0.040
PGD009S030CSF01 Front 9 0.030 - 0.040
PGD009S030BSR01 Rear 9 0.018 - 0.028
PGD015S030BSA01 90
° Angle 15 0.018 - 0.028
PGD015S030CSA01 90° Angle 15 0.030 - 0.040
PGD015S030CSF01 Front 15 0.030 - 0.040
PGD015S030BSR01 Rear 15 0.018 - 0.028
PGD025S030BSA01 90° Angle 25 0.018 - 0.028
PGD025S030CSA01 90° Angle 25 0.030 - 0.040
PGD025S030CSF01 Front 25 0.030 - 0.040
PGD025S030BSR01 Rear 25 0.018 - 0.028
PGD037S030BSA01 90° Angle 37 0.018 - 0.028
PGD037S030CSA01 90° Angle 37 0.030 - 0.040
PGD037S030CSF01 Front 37 0.030 - 0.040
90° Angle Mount
Front Mount
Connector Array Polymeric ESD Suppressors
PulseGuard
®
Suppressors
214
www.littelfuse.com
