DS3992
Two-Channel, Push-Pull CCFL Controller
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________
13
© 2006 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
is a registered trademark of Dallas Semiconductor Corporation.
Springer
Power-Supply Decoupling
To achieve best results, it is highly recommended that a
decoupling capacitor be used on pin 10, the IC power-
supply pin. Pins 15 and 16, also V
CC
pins, do require
connection to supply voltage, but do not require any
additional decoupling. Typical values of decoupling
capacitors are 0.01µF or 0.1µF. Use a high-quality,
ceramic, surface-mount capacitor, and mount it as
close as possible to the V
CC
and GND pins of the IC to
minimize lead inductance.
Chip Topology
TRANSISTOR COUNT: 53,000
SUBSTRATE CONNECTED TO GROUND
Package Information
For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo
.
