HSMC-C280

7
Figure 11. Tape dimensions.
Figure 12. Tape leader and trailer dimensions.
USER FEED
DIRECTION
1.75 (0.069)
CARRIER TAPE
COVER TAPE
4.00 (0.157)
1.50 (0.059)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
DIM. C
(SEE TABLE 1)
CATHODE
DIM. A
± 0.10 (± 0.004)
DIM. B
± 0.10 (± 0.004)PART NUMBER
DIM. C
± 0.10 (± 0.004)
HSMx-C280 SERIES 1.10 (0.043) 0.60 (0.024) 0.66 (0.026)
DIM. B
(SEE TABLE 1)
4.00 (0.157)
2.00 ± 0.05
(0.079 ± 0.002)
3.50 ± 0.05
(0.138 ± 0.002)
0.23 ± 0.05
(0.009 ± 0.002)
8.00 ± 0.30
(0.315 ± 0.012)
DIM. A
(SEE TABLE 1)
END START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT PUNCHED
PAPER TAPE SEALED
WITH COVER TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
PUNCHED PAPER TAPE
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF PAPER TAPE
AND/OR
COVER TAPE.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-0393EN
AV02-0602EN - February 3, 2012
Re ow Soldering:
For more information on re ow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator
Components.
Storage Condition: 5 to 30°C @ 60%RH max.
Baking is required before mounting, if:
1. Humidity Indicator Card is > 10% when read at 23 ± 5°C.
2. Device expose to factory conditions <30°C/60%RH more than 672 hours.
Recommended baking condition: 60±5°C for 20 hours.

HSMC-C280

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - SMD AlInGaP Red Red
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet