Path: Home > Rack Index > Table Top Racks - Ventilated (RCHV Series)
17.5" (444 mm) Deep Models
Table Top Rack Cabinets
Heavy Duty - Ventilated (RCHV Series)
click to enlarge
Features:
z Heavy duty, 16-gauge steel, 19” rack mount - table top
cabinet.
z Ventilated on both sides & optimized per size to allow
natural air convection.
z For solid side versions link to our RCHS series.
z Choice of three depths - 17.5" (444 mm), 24.5" (622
mm) and 31.5" (800 mm).
z Panel rails are infinitely adjustable (front to back), round
hole punched for 10-32 clip-nuts to full EIA hole centers
(5/8 - 5/8 - 1/2 inch spacing).
z Includes two pairs of rails (for rear support of heavier
equipment or shelves), rubber feet, black ABS plastic
handles, a starter pack of 10-32 clip nuts & matching
1421ABK black screws.
z Supplied unassembled (four cabinet pieces & four rails),
shipped in a flat pack container for handling ease &
protection (see photo below).
z Simple assembly using one bolt in each corner to lock
the sides to the top and bottom (hardware included).
z Overall width 21” (533 mm).
z Overall height 2” (51 mm) additional over panel height.
z Front & back lip is .585" (14 mm) so usable depth is
reduced by 1.17" (30 mm).
z Recommended maximum weight (RCHV1902824
tested) - 800 pounds (364 kg).
z Rugged textured powder paint finish.
z Stocked in Black & Light Gray (RAL7035).
Catalog pages (2) on this series
Adobe Reader .pdf format (295K)
Part Number Color
Reader
File
AutoCAD
.dxf File
(zipped)
3D
Solid Model
.stp files
(zipped)
Panel Hei
ht
Number o
Clip Nuts
& Screws
Included
Wei
ht
Inches Units
RCHV1900817BK1
Blac
8.75
5U 8 36# (16.4 kg)
