For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HIGH SPEED DIGITAL LOGIC - SMT
7
HMC722LC3C
v04.0313
GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR
Evaluation PCB
List of Materials for Evaluation PCB 118777
[1]
Item Description
J1 - J6 PCB Mount SMA RF Connectors
J7 - J9 DC Pin
C1, C2 100 pF Capacitor, 0402 Pkg.
C3, C4 4.7 µF Capacitor, Tantalum
R1 10 Ohm Resistor, 0603 Pkg.
U1
HMC722LC3C
High Speed Logic, AND / NAND / OR / NOR
PCB
[2]
118775 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Item Description
J1 AN
J2 AP
J3 BN
J4 BP
J5 DP
J6 DN
J7 Vee
J8 VR
J9 GND
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to Vee. A suffi-
cient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
