Evaluation Board User Guide
UG-026
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Universal Evaluation Board for Triple, High Speed Op Amps
Offered in 14-Lead TSSOP Packages
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
RoHS compliant
GENERAL DESCRIPTION
The Analog Devices, Inc., EB-O14RU-3Z universal evaluation
board is designed to help users evaluate triple, high speed op
amps offered in 14-lead TSSOP packages. The EB-O14RU-3Z is
a bare board (that is, there are no components soldered to the
board) that enables users to quickly prototype a variety of triple
op amp circuits, which minimizes risk and reduces time to market.
Figure 1 shows the component side of the bare evaluation board,
and Figure 2 shows the circuit side of the bare evaluation board.
The 2-layer evaluation board accepts SMA edge-mounted con-
nectors on the inputs and outputs for efficient connection to test
equipment or other circuitry. The ground plane, component
placement, and supply bypassing are designed to minimize
parasitic inductance and capacitance.
Figure 3 shows the evaluation board schematic. The PCB
assembly drawings are shown in Figure 4 and Figure 5. The
layout patterns for the PCB are shown in Figure 6 and Figure 7.
EVALUATION BOARD, COMPONENT SIDE AND CIRCUIT SIDE
08152-001
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART
NUMBER LABELING ON YOUR BOARD MAY
BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 1. Component Side of Evaluation Board
08152-002
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART
NUMBER LABELING ON YOUR BOARD MAY
BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 2. Circuit Side of Evaluation Board
