© Semiconductor Components Industries, LLC, 2005
December, 2005 − Rev. 2
1 Publication Order Number:
MAC210A8/D
MAC210A8, MAC210A10
Triacs
Silicon Bidirectional Thyristors
Designed primarily for full-wave AC control applications, such as
light dimmers, motor controls, heating controls and power supplies; or
wherever full−wave silicon gate controlled solid−state devices are
needed. Triac type thyristors switch from a blocking to a conducting
state for either polarity of applied main terminal voltage with positive
or negative gate triggering.
Features
• Blocking Voltage to 600 Volts
• All Diffused and Glass Passivated Junctions for Greater Parameter
Uniformity and Stability
• Small, Rugged, Thermowatt Construction for Low Thermal
Resistance, High Heat Dissipation and Durability
• Gate Triggering Guaranteed in Four Modes (Quadrants)
• Pb−Free Packages are Available*
MAXIMUM RATINGS (T
J
= 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off−State Voltage (Note 1)
(T
J
= −40 to +125°C, Sine Wave 50 to 60 Hz,
Gate Open) MAC210A8
MAC210A10
V
DRM,
V
RRM
600
800
V
On−State RMS Current (T
C
= +70°C)
Full Cycle Sine Wave 50 to 60 Hz
I
T(RMS)
10 A
Peak Non−Repetitive Surge Current
(One Full Cycle, Sine Wave 60 Hz,
T
C
= +25°C)
Preceded and followed by rated current
I
TSM
100 A
Circuit Fusing Considerations, (t = 8.3 ms) I
2
t 40 A
2
s
Peak Gate Power
(T
C
= +70°C, Pulse Width = 10 ms)
P
GM
20 W
Average Gate Power
(T
C
= +70°C, t = 8.3 ms)
P
G(AV)
0.35 W
Peak Gate Current
(T
C
= +70°C, Pulse Width = 10 ms)
I
GM
2.0 A
Operating Junction Temperature Range T
J
−40 to +125 °C
Storage Temperature Range T
stg
−40 to +150 °C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. V
DRM
and V
RRM
for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
TRIACS
10 AMPERES RMS
600 thru 800 VOLTS
TO−220AB
CASE 221A−07
STYLE 4
1
PIN ASSIGNMENT
1
2
3 Gate
Main Terminal 1
Main Terminal 2
4
Main Terminal 2
MT1
G
MT2
http://onsemi.com
MAC210AxG
AYWW
MARKING
DIAGRAM
x = 8 or 10
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
2
3
Device Package Shipping
ORDERING INFORMATION
MAC210A8 TO−220AB 500 Units/Box
MAC210A10 TO−220AB 500 Units/Box
MAC210A8G TO−220AB
(Pb−Free)
500 Units/Box
MAC210A10G TO−220AB
(Pb−Free)
500 Units/Box
