OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2938963

P1-P3P4-P6
QUINT DIODE provides:
•
100% decoupling
of power supplies connected in
parallel
• Can be
installed in potentially explosive areas
•
Load currents up to 60 A
supported
•
Easy assembly
by snapping onto the DIN rail
1. Short Description
The redundancy module can be used to 100%
decouple two power supplies of the same type, which
are connected in parallel on the output side to increase
power or provide redundancy.
The reliability of a power supply determines the
availability of individual components in a system and
whether complex systems can function safely.
Redundant connections are designed for supplying
systems, which place particularly high requirements on
operational safety. The redundant configuration of the
power supply ensures continuous system availability.
The power supply of a system can be configured
redundantly through the connection of at least two
power supply units in parallel. Together they then
supply the connected devices. The connected power
supplies must be large enough that the total current
requirements of all devices can be fully met by one
power supply. In the event of an internal fault on one
device or a mains voltage supply failure on the primary
side, the other device automatically takes over the
complete power supply without interruption and vice
versa. In this way the operational reliability of the
system can be increased effectively.
Redundancy Module
QUINT-DIODE/40
Phoenix Contact GmbH & Co. KG • 32825 Blomberg, Germany
Phone +49 - 52 35 - 30 0 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
Phoenix Contact page 2 of 6
solid flexible torque
[mm
2
]AWG [Nm] [Ib in.]
0.5 - 16 0.5 - 10 20 - 6 1.2 - 1.5 10.6 -13.3
Description
Redundancy module
Technical Data
Input Data
Input voltage
U
N
/U
max
Input current
I
N
(Cable cross section 6 mm
2
[10 AWG]) I
max
(Cable cross section 10 mm
2
[8 AWG]) I
max
(Cable cross section 16 mm
2
[6 AWG]) I
max
Transient surge voltage protection using Transil diode
Protection against polarity reversal with diode
Input/output voltage drop
Maximum power dissipation with nominal load
General Data
Insulation voltage: Input, output/housing
Mounting position
Can be mounted with spacing - Vertical
- Horizontal
Degree of protection
Protection class (without PE connection)
Efficiency
Housing version
Dimensions (W x H x D) + DIN rail
Weight
QUINT-DIODE/40
Redundancy module
Type Order No.
Pcs.
Pkt.
QUINT-DIODE/40 29 38 96 3
1
24 V DC/< 30 V DC
2 x 20 A, 1 x 40 A
2 x 19 A, 1 x 39 A (< 40°C [104˚F]), 2 x 16 A, 1 x 32 A (< 60°C [140˚F])
2 x 27 A, 1 x 54 A (< 40°C [104˚F]), 2 x 21 A, 1 x 43 A (< 60°C [140˚F])
2 x 30 A, 1 x 60 A (< 40°C [104˚F]), 2 x 24 A, 1 x 48 A (< 60°C [140˚F])
Ye s
Ye s , < 60 V
0.5 V, approximately
20 W, approximately
1 kV
NS 35 DIN rail according to EN 50 022
5 cm (1.969 in.)
2 cm (0.787 in.)
IP20
II
> 97%
AIMg (enclosure), GD-ZnAICu (heatsink)
(62 x 84 x 102 mm [2.441 x 3.307 x 4.016 in.])
0.7 kg, approximately
84 mm
(3.307 in.)
102 mm (4.016 in.)
62 mm
(
2.441 in.
)
IN
1
OUT
2
Redundancy Module QUINT-DIODE/40
2. Technical Data
10 mm (0.39 in.)
Phoenix Contact page 3 of 6
Redundancy Module QUINT-DIODE/40
Climatic Data
Ambient temperature - Operation
- Storage
Humidity
Vibration according to IEC 68-2-6
Shock according to IEC 68-2-27
Degree of pollution according to EN 50 178
Climatic category
Certification/Standards
Electrical safety
(of IT equipment)
Industrial control equipment
Conformance mark according to EN 50 021
Electrical equipment for potentially explosive areas
Electromagnetic compatibility
c
Conformance with EMC directive:
• Noise immunity
• Noise emission
-25°C to +70°C (-13˚F to +158˚F) -25°C to +60°C (-13°F to +140°F)
-40°C to +85°C (-40˚F to +185˚F)
> 95%
3 - 15 Hz, amplitude
±
2.5 mm/15 Hz - 150 Hz, 2.3 g
30 g, 18 ms
2
EN 60 950/VDE 0805, EN 50 178/VDE 0160
u
UL/C-UL Recognized UL 60 950
UL/C-UL Listed UL 508
X
II 3G EEx nA IIC T4 KEMA 03 ATEX 1197X
UL/C-UL Recognized UL 1604 Class I, Division 2, Groups A, B, C, D
89/336/EEC
EN 61 000-6-2
EN 55 011/EN 55 022 B
1
)
1
) Class B: Industrial and domestic applications
EN 55 011
=
CISPR 11; EN 50 022
=
CISPR 22; EN 61 000
=
IEC 1000
U
LISTED
IN OUT
QUINT DIODE
1 2
Figure 04
11
11
22
22
33
33
44
44
1
DC input 1:U
N
= 24 V, I
N
= 20 A, I
max
= 28 A
2
DC input 2:U
N
= 24 V, I
N
= 20 A, I
max
= 28 A
3
DC output
4
Universal latching foot for NS 35 DIN rails
according to EN 50 022
3. Device View, Connections, and Control Elements
P1-P3P4-P6

2938963

Mfr. #:
Buy 2938963
Manufacturer:
Phoenix Contact
Description:
DIN Rail Power Supplies QUINT-DIODE/40
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet