Errata Document S6E2D5 Series
December 9, 2016 Document No. 002-05034 Rev. *B 2
Table 14-10 should be added as indicated by the shading below.
Table 14-10 Typical and Maximum Current Consumption in Deep Standby Stop Mode, Deep Standby
RTC Mode and VBAT
*1: V
CC
=3.3 V
*2: V
CC
=3.6 V
*3: When all ports are fixed.
*4: When LVD is OFF
*5: When sub oscillation is OFF
*6: When using the crystal oscillator of 32 kHz (including the current consumption of the oscillation circuit)
When the Standard setting (CCS/CCB=11001110)
*7: When using the crystal oscillator of 32 kHz (including the current consumption of the oscillation circuit)
When the low power setting (CCS/CCB=00000100)
Ordering Information should be corrected as indicated by the shading below.
(Error)
Plastic・LQFP (0.5 mm pitch), 120 pin
(FPT-120P-M21)
Plastic・LQFP (0.5 mm pitch), 176 pin
(FPT-176P-M07)
Plastic・PFBGA (0.5 mm pitch), 161 pin
(FDJ161)
Plastic・Ex-LQFP (0.5 mm pitch), 120 pin
(LEM120)
Plastic・LQFP (0.5 mm pitch), 120 pin
(FPT-120P-M21)
Plastic・LQFP (0.5 mm pitch), 176 pin
(FPT-176P-M07)
Plastic・PFBGA (0.5 mm pitch), 161 pin
(FDJ161)
Plastic・Ex-LQFP (0.5 mm pitch), 120 pin
(LEM120)
Rev. 2.0 September 16, 2015