Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifi cations are believed to be reliable but are not verifi ed, and Buyer must conduct and complete all performance and other testing of the products, alone
and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifi cations or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability
of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.
Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in
this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
Highlights
• Minimum cost per channel
Applications
• Multiple-port XAUI to SFI SFP+ line cards
or NICs
• 10GBASE-KR-compliant backplane
transceivers
•
Synchronous Ethernet systems
• 10 GbE switch cards, router cards, and
NICs
Microsemi's multichannel 10 GbE transceivers capture the highest port
density at the lowest cost.
Microsemi’s dual channel and quad channel XAUI-to-serial transceivers,
VSC8488 and VSC8484, deliver minimum cost per channel with
maximum port densities at the lowest power. The devices achieve
an excellent 1 W per channel power dissipation while supporting the
increased port densities required for next-generation 10 Gbps platforms.
The VSC8488 and VSC8484 integrate Microsemi's world-class
electronic dispersion compensation (EDC) performance across multiple
data rates: 9.95 Gbps WAN, 10.3 Gbps Ethernet (GbE), and 10.5Gbps
Fibre Channel. The devices also meet the SFP+ SR/LR/LRM host
requirements in accordance with the SFF-8431 and IEEE 802.3aq
specifi cations.
The EDC capabilities are optimized by the VScope™ input signal
monitoring integrated circuit, which delivers more accurate, in-line views
of the post-equalization waveform.
The VSC8488 and VSC8484 compensate for optical impairments
in SFP+ LRM applications, along with degradations of the PCB,
while providing wide system margin for SR and LR applications. The
transmit path incorporates a multi-tap output driver to provide the
fl exibility required to meet the demanding 10GBASE-KR (IEEE 802.3ap)
standard.
A complete suite of BIST functionality includes line and client loopbacks
along with pattern generation and error detection. Highly fl exible
clocking options support either LAN or WAN operation, along with
seamless Synchronous Ethernet. Both devices include selectable
lane ordering; the VSC8484 includes failover switching capability for
protection routing.
The VSC8488 device supports three serial interface confi gurations:
MDIO, two-wire serial slave, and two-wire serial master. This highly
fl exible communication scheme, along with a minimum of 12
programmable GPIO pins, allows for independent control of the
VSC8488 and VSC8484 channels while providing access to a wide
range of device monitors and XFP/SFP+ module management.
VSC8488 and VSC8484
Multichannel 10 Gbps XAUI to Serial Transceivers with EDC
Switch Module
Dual
10 GbE
MAC/NIC
Module
10 GbE Line Card or NIC
VSC8488
10GBASE-KR
Backplane
Module
XAUI
Interface
10 GbE
XAUI
Switch
4
4
Serial
Interface
VSC8488
Serial
Interface
4
XAUI
Interface