NOTICE - These drawings, specificati ons, or other data (1) are, and rema in the
are given by Amphenol Corp. The fur nishing of these drawings, specifica tions, or
not to be regarded by implication or otherwise in any manner licensing, granting
confidential and not to be disclosed to any person other than those to w hom they
other data by Amphenol Corp., or to any other person to anyone for any p urpose is
rights or permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way b e related to
UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE:
property of Amphenol Corp. (2) must be returned upon request; and (3) ar e
or disclosed by said drawings, speci fications, or other data.
#.015 (0,381 mm)
REFERENCE
MATERIAL
#.005 (0,127 mm)
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
# 1$
CAD FILE
APPROVED
ENGINEER
DRAWN
THIRD ANGLE PROJ.
DRAWING NO.
Amphenol RF
Danbury, CT, USA
Tainan, Taiwan
Shenzhen, China
www.amphenolrf.com
74868
CODE ID
TITLE
DATE
DATE
DATE
DRAWING NO.DWG SIZE
B
SCALE:
REV
SHEET OF
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
1075
3.5:1
2
2
1075
0.687
0.625
ACROSS FLATS
5/8 WRENCH FLATS
0.442
0.443
0.400 0.359 0.733 0.1090.132
0.375
0.35
0.38
0.18
SEE NOTES
ABHAYA KISHORE 03-Dec-10
COAX CABLE TERMINATION
SINGLE HOLE MOUNTING
FOR RG-8/U
K. CAPOZZI 1/5/11
H
A REDRAWN NO CHANGE 8-25-53 -- --
F SEE SHEET-1 3-26-74 20260 EVH
G REDRAWN IN PRO E 7/14/11 48363 RAK
H ADD STAMPING TO COD 11/15/11 48803 CPM
NOTES:
1. MATERIALS AND FINISHES:
BODY - BRASS, SILVER PLATING
CLAMP NUT - BRASS, SILVER PLATING
BRAID CLAMP - BRASS, SILVER PLATING
GASKET - SILICONE RUBBER
2. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOLRF,1075, AND DATE CODE"
3. RECOMMENDED CABLE ASSEMBLY INSTRUCTIONS
A. TRIM CABLE A SHOWN
B. SLIDE CLAMP NUT, WASHER AND GASKET OVER CABLE.
C. SLIDE BRAID CLAMP OVER BRAID UPTO JACKET OF CABLE. FOLD
BRAID BACK OVER CLAMP MAKING SURE BRAID IS EVENTLY DISTRIBUTED
OVER THE SURFACE OF THE CLAMP.
D. INSERT THE CABLE INTO THE CONNECTOR, SCREW NUT INTO BODY
WITH WRENCH UNTIL MODERATELY TIGHT.
SHOWS CABLE ENTRY DIMENSIONS.
CLAMP NUT WASHER GASKET BRAID CLAMP BODY LOCK WASHER 0.625
HEX NUT
1/2-28 UNEF-2A THREAD
(AFTER PLATING)
STAMP "74868 MX-1554/U"
5/8 WRENCH FLATS
SCALE 1.500
SCALE 2.000
RECOMMENDED
CABLE STRIPPING DIMENSIONS
