74ACTQ16543MTD

December 1991
Revised December 1998
74ACTQ16543 16-Bit Registered Transceiver with 3-STATE Outputs
© 1999 Fairchild Semiconductor Corporation DS010967.prf www.fairchildsemi.com
74ACTQ16543
16-Bit Registered Transceiver with 3-STATE Outputs
General Description
The ACTQ16543 contains sixteen non-inverting transceiv-
ers containing two sets of D-type registers for temporary
storage of data flowing in either direction. Each byte has
separate control inputs which can be shorted together for
full 16-bit operation. Separate Latch Enable and Output
Enable inputs are provided for each register to permit inde-
pendent input and output control in either direction of data
flow.
The ACTQ16543 utilizes Fairchild Quiet Series technol-
ogy to guarantee quiet output switching and improved
dynamic threshold performance. FACT Quiet Series fea-
tures GTO output control and undershoot corrector for
superior performance.
Features
Utilizes Fairchild FACT Quiet Series technology
Guaranteed simultaneous switching noise level and
dynamic threshold performance
Guaranteed pin-to-pin output skew
Independent registers for A and B buses
Separate controls for data flow in each direction
Back-to-back registers for storage
Multiplexed real-time and stored data transfers
Separate control logic for each byte
16-bit version of the ACTQ543
Outputs source/sink 24 mA
Additional specs for Multiple Output Switching
Output loading specs for both 50 pF and 250pF loads
Ordering Code:
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol Pin Descriptions
FACT, Quiet Series, FACT Quiet Series and GTO are trademarks of Fairchild Semiconductor Corporation.
Order Number Package Number Package Description
74ACTQ16543SSC MS56A 56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300” Wide
74ACTQ16543MTD MTD56 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Pin Names Descriptions
OEAB
n
A-to-B Output Enable Input (Active LOW)
OEBA
n
B-to-A Output Enable Input (Active LOW)
CEAB
n
A-to-B Enable Input (Active LOW)
CEBA
n
B-to-A Enable Input (Active LOW)
LEAB
n
A-to-B Latch Enable Input (Active LOW)
LEBA
n
B-to-A Latch Enable Input (Active LOW)
A
0
–A
15
A-to-B Data Inputs or
B-to-A 3-STATE Outputs
B
0
–B
15
B-to-A Data Inputs or
A-to-B 3-STATE Outputs
www.fairchildsemi.com 2
74ACTQ16543
Connection Diagram
Pin Assignment for SSOP and TSSOP
Functional Description
The ACTQ16543 contains sixteen non-inverting transceiv-
ers with 3-STATE outputs. The device is byte controlled
with each byte functioning identically, but independent of
the other. The control pins may be shorted together to
obtain full 16-bit operation. The following description
applies to each byte. For data flow from A to B, for exam-
ple, the A-to-B Enable (CEAB
n
) input must be LOW in
order to enter data from A
0
–A
15
or take data from B
0
–B
15
,
as indicated in the Data I/O Control Table. With CEAB
n
LOW, a LOW signal on the A-to-B Latch Enable (LEAB
n
)
input makes the A-to-B latches transparent; a subsequent
LOW-to-HIGH transition of the LEAB
n
signal puts the A
latches in the storage mode and their outputs no longer
change with the A inputs. With CEAB
n
and OEAB
n
both
LOW, the 3-STATE B output buffers are active and reflect
the data present at the output of the A latches. Control of
data flow from B to A is similar, but using the CEBA
n
,
LEBA
n
and OEBA
n
inputs.
Data I/O Control Table
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
A-to-B data flow shown; B-to-A flow control
is the same, except using CEBA
n
, LEBA
n
and OEBA
n
Inputs Latch Status
(Byte n)
Output
Buffers
(Byte n)
CEAB
n
LEAB
n
OEAB
n
H X X Latched High Z
X H X Latched
L L X Transparent
X X H High Z
L X L Driving
3 www.fairchildsemi.com
74ACTQ16543
Logic Diagrams
Byte 1 (0:7)
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
Byte 2 (8:15)
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.

74ACTQ16543MTD

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
IC TXRX NON-INVERT 5.5V 56TSSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union