OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TEP 160-2415

P1-P3P4-P4
http://www.tracopower.com Page 1 of 4
DC/DC Converters
TEP 160 Series, 150 – 196 Watt
Features
◆
Compact metal package
◆ Wide 2:1 input voltage ranges
16.5–36, 33–75 VDC
◆ Very high efficiency up to 93%
◆ No minimum load
◆ Soft start
◆ Ajustable output voltage +10/-20%
◆ Sense line
◆ Remote On/Off input
◆ Reverse input voltage protection
◆ Over temperature protection
◆ Optional Heatsink
◆ 3-year product warranty
The TEP 160 Series is a family of isolated high performance dc-dc converter modules
with wide 2:1 input voltage ranges which come in a rugged, sealed industry stan-
dard half brick package.
A very high efficiency allows full power operation without forced air cooling at 25°C
This temperature can be increased to 40°C with optional mounted heatsink or up
to 60°C when mounted on an iron base plate. The very wide input voltage range
and reverse input voltage protection make these converters interesting solution for
battery operated systems. Typical applications are in telecom/datacom, industry
control and railway systems for on board power distribution.
These series is available in many optional designs on demand --> see options.
Order code Input voltage Output voltage Output current max. Efficiency typ.
TEP 160-2412
12 VDC 13 A 92 %
TEP 160-2413
16.5 – 36 VDC
15 VDC 10 A 92 %
TEP 160-2415
(24 VDC nominal)
24 VDC 6.5 A 93 %
TEP 160-2416
28 VDC 5.5 A 93 %
TEP 160-2418
48 VDC 3.3 A 92 %
TEP 160-4812
12 VDC 16 A 92 %
TEP 160-4813
15 VDC 13 A 93 %
TEP 160-4815 33 – 75 VDC
24 VDC 8 A 92 %
TEP 160-4816
(48 VDC nominal)
28 VDC 7 A 92 %
TEP 160-4818
48 VDC 4 A 92 %
TEP 160-48153
53 VDC 3.7 A 92 %
Standard Models
(Models pictured with optional heatsink)
TEP-HS1
Heat-sink for standard version (incl. mounting screws and thermal pad)
TCK-xxx
Common mode chokes for filter proposals to meet EN55032 class A/B --> see application note
on demand
Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output
Negative (passive = Off) Remote On/Off function (standard is passive = On)
Sync pin to synchronize switching frequency of up to 3 units (EMC reason)
Options
http://www.tracopower.com Page 2 of 4
Input Specifications
Input current at no load (nominal input voltage) 24 V models: 35 mA typ.
48 V models: 25 mA typ.
Start-up voltage 24 V models: 18 VDC max.
48 V models: 34 VDC max.
Under voltage shut down 24 V models: 15.5 – 16.3 VDC
48 V models: 31.6 – 32.5 VDC
Surge voltage (1 sec. max.) 24 V models: 50 VDC
48 V models: 100 VDC
Conducted noise EN 55032 class A/B with external components
see application note
EMC immunity EN 50121-3-2
– ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A
– Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±2 kV perf. criteria A
24 / 48V models: chemi-con KY 220 µF, 100 V, ESR 48 mOhm
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
Reverse voltage protection parallel diode
Output Specifications
Voltage set accuracy (at full load, nominal input) ±1 %
Output voltage adjustment +10 % / –20 % by external resistor
see application note
Regulation – Input variation Vin min. to Vin max. 0.1 % max.
– Load variation (0 – 100 %) 0.1 % max.
Temperature coefficient ±0.02 %/K
Minimum load not required
Remote sense 10 % max. of Vout nom.
(trim up value to subtract)
Ripple and noise (20 MHz Bandwidth) 12 – 15 VDC models: 100 mVp-p typ.
24 – 28 VDC models: 200 mVp-p typ.
48 – 53 VDC models: 300 mVp-p typ.
Start up time (nominal Vin and constant resistive load) 75 ms typ. (at power On or remote On)
Transient response (25 % load step change) 250 µs typ.
Output current limitation at 120 – 150 % of Iout max.
Over voltage protection at 115 – 130 % of Vout nom.
Short circuit protection indefinite, automatic recovery.
Capacitive load 12 VDC models: 10‘800 / 13‘300 µf
15 VDC models: 6‘600 / 8‘600 µf
24 VDC models: 2‘700 / 3‘300 µf
28 VDC models: 1‘900 / 2‘500 µf
48 VDC models: 680 / 830 µf
53 VDC model: 690 µf
DC/DC Converters
TEP 160 Series 150 – 196 Watt
http://www.tracopower.com
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 3 of 4
General Specifications
Temperature ranges – Operating –40°C to +75°C
– Case temperature +115° C ma x .
– Storage –55°C to +125°C
Thermal impedance – without heat-sink 6.1°C/W
– with heat-sink 5.1°C/W
Power derating depending on installation!
– without heat-sink 1.5 %/K above +25°C
– with heat-sink 1.5 %/K above +40°C
– with iron base plate (19” x 3.5” x 0.063”) 1.8 %/K above +60°C
please refer to application note for temperature
measure point that should not exceed 115°C.
Over temperature protection at +120°C
Thermal shock MIL-STD-810F
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 380‘000 h
Isolation voltage (60 s) – Input to output 2’250 VDC (basic insulation)
– Input/output to case 1’600 VDC
Isolation capacitance – Input to output 2500 pF max.
Isolation resistance – Input to output (500 VDC) >1 GOhm min.
Switching frequency 250 kHz typ. (puls width modulation)
Safety standards UL 60950-1, IEC/EN 60950-1
– Certification documents www.tracopower.com/overview/tep160
Remote On/Off – positive logic (standard) – On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC
or short circuit pin 1 and 3
– negative logic (option) – On: 0 to 1.2 VDC
or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
– Off idle current: 3 mA
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
General Specifications
Casing material metal
Potting material silicone (UL94V-0 rated)
Base material FR4
Vibration MIL-STD-810F
Application note: www.tracopower.com/overview/tep160
DC/DC Converters
TEP 160 Series 150 – 196 Watt
P1-P3P4-P4

TEP 160-2415

Mfr. #:
Buy TEP 160-2415
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters Product Type: DC/DC; Package Style: 2.3"x1.9"; Output Power (W): 160; Input Voltage: 16.5-36 VDC; Output 1 (Vdc): 24; Output 2 (Vdc): N/A; Output 3 (Vdc): N/A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet