PDUB20 Datasheet PDUB20 | P1-P3

1.9kW Single-Phase Hot-Swap PDU, 120V 20A

Outlets (4-5-15R, 4-5-15/20R) 2 5-20P, 10ft & 6ft

Cords 2U Rack-Mount

MODEL NUMBER: PDUB20

Description

Tripp Lite’s Hot-swap PDU systems enable live-replacement of standard UPS systems for maintenance

with no interruption of connected server or networking loads. Dual input power cables support PDU

connection to separate Utility and UPS power sources. Manual transfer switch with lighted status

indicators controls the source of power to connected equipment between Utility and UPS. Set the switch

to UPS during normal operation and connected equipment will receive full-time conditioned power from

the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and

bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is

up and running with all data and electrical connections restored, set the switch back to the UPS setting to

once again provide fully-conditioned UPS power to connected equipment.

Features

Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance

with no interruption of connected server or networking loads

●

PDUB20 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to

2600VA or 1920 watts with a NEMA 5-15P or 5-20P input cable

●

2U horizontal rackmount form factor compatible with 2 or 4 post racks

●

Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS

systems (select installations, see manual)

●

Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources

●

4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utility and UPS operating

modes

●

One additional 5-15/20R pass-through outlet supports UPS input power cord

●

Highlights

Single phase 20A 120V Hot-

swap PDU

●

Enables live replacement of a

standard UPS with zero

downtime

●

2U horizontal rackmount

installation

●

Compatible with any UPS with a

5-15P or 5-20P input plug

●

Manual transfer switch controls

PDU input power source

●

Pair of 5-20P input cables

connect to separate Utility and

UPS inputs

●

8 Built-in outlets (4 5-15R / 4 5-

15/20R)

●

Package Includes

Hot-swap PDU System

●

2U mounting brackets

●

User manual with warranty

information

●

1 / 3

Specifications

Dual input power cables support PDU connection to separate Utility and UPS power sources

●

Manual transfer switch with lighted status indicators controls the source of power to connected

equipment between Utility and UPS

●

Set the switch to UPS during normal operation and connected equipment will receive full-time

conditioned power from the UPS

●

Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power

directly from the Utility line cord while the UPS system is removed and replaced with a fresh one

●

Once the new UPS is up and running with all connections restored, set the switch back to the UPS

setting to once again provide fully-conditioned UPS power to connected equipment

●

OVERVIEW

UPC Code 037332153883

PDU Type Hot-Swap

OUTPUT

Output Watt Capacity (Watts) 1920

Output Capacity Details 2.03kW (127V), 1.92kW (120V), 1.6kW (100V) / 20A total capacity (Agency de-rated to 16A); 16A max per 5-15/20R

outlet; 12A max per 5-15R outlet

Frequency Compatibility 50 / 60 Hz

Output Receptacles (4) 5-15/20R; (4) 5-15R

Output Nominal Voltage 100; 120; 127

Overload Protection n/a

INPUT

PDU Input Voltage 100; 120; 127

Recommended Electrical Service 20A 120V

Maximum Input Amps 16.0

PDU Plug Type NEMA 5-20P

Input Cord Length Details Utility input cable (10 ft / 3m) / UPS input cable (6 ft / 1.8m)

Input Phase Single-Phase

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs Lighted indicators confirm UPS and Utility switch position and operating mode

Switches Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6

milliseconds

2 / 3

not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:

https://www.tripplite.com/products/product-certification-agencies

PHYSICAL

Minimum Required Rack Depth

(inches)

Minimum Required Rack Depth (cm) 20.32

Shipping Dimensions (hwd / in.) 12.40 x 6.00 x 20.00

Shipping Dimensions (hwd / cm) 31.50 x 15.24 x 50.80

Shipping Weight (lbs.) 8.50

Shipping Weight (kg) 3.86

Unit Dimensions (hwd / in.) 3.42 x 17.32 x 3.03

Unit Dimensions (hwd / cm) 8.7 x 44 x 7.7

Unit Weight (lbs.) 7.70

Unit Weight (kg) 3.49

Material of Construction Metal

Form Factors Supported 2U rackmount in 2 or 4 post racks

PDU Form Factor Horizontal (2U)

ENVIRONMENTAL

Storage Temperature Range 5 to 122F (-15 to 50C)

Relative Humidity 5-95% non condensing

Operating Elevation (ft.) 0-10,000

Operating Elevation (m) 0-3000

CERTIFICATIONS

Certifications Tested to UL60950 (USA), CSA (Canada)

WARRANTY

Product Warranty Period

(Worldwide)

2-year limited warranty

3 / 3

P1-P3

PDUB20

Mfr. #:

Buy PDUB20

Manufacturer:

Tripp Lite

Description:

Power Outlet Strips 4)5-15R 4)5-15/20R HOTSWAP; 5-15/20P IN

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

PDUB20