Part Input Output Output Max
Number Voltage Voltage Current Capacitive
SMD 2kVDC (VDC) (VDC) (mA) Load
(1)
R1Z-xx3.3* (/H) 3.3, 5, 12, 15, 24 3.3 303 2200µF
R1Z-xx05* (/H) 3.3, 5, 12, 15, 24 5 200 1200µF
R1Z-xx09* (/H) 3.3, 5, 12, 15, 24 9 111 680µF
R1Z-xx12* (/H) 3.3, 5, 12, 15, 24 12 84 680µF
R1Z-xx15* (/H) 3.3, 5, 12, 15, 24 15 66 470µF
xx= Input Voltage (other input and output voltage combinations available on request
*add suffix -R for tape & reel packing e.g. R1Z-0505-R
*add suffix /P for continuous short circuit protection, e.g. R1Z-0505/P-R
Input Voltage Range ±5%
Output Voltage Accuracy ±2%
Line Voltage Regulation 1% max.
Load Voltage Regulation 1% max.
Output Ripple and Noise (at 20MHz BW) 100mVp-p max.
Operating Frequency 20kHz min. / 40kHz typ. / 80kHz max.
Efficiency at Full Load 50% min. / 60% typ.
Minimum Load 10% (2)
No Load Power Consumption 134mW min. / 217mW typ. / 350mW max.
Isolation Voltage (tested for 1 second) 1000VDC
(rated for 1 minute**) 500VAC / 60Hz
Isolation Voltage H-Suffix (tested for 1 second) 2000VDC
H-Suffix (rated for 1 minute**) 1000VAC / 60Hz
Isolation Capacitance 70pF typ.
Isolation Resistance 10 GW min.
Short Circuit Protection 1 Second
P-Suffix Continuous
Operating Temperature Range (natural convection) -40°C to +70°C (see Graph)
Storage Temperature Range -55°C to +125°C
Reflow Temperature ROHS compliant 245°C (30 sec) max.
Vapor Phase Process 230°C (90 sec) max.
(for more details see Application Notes)
Relative Humidity 95% RH
Package Weight 1.6g
Packing Quantity 33 pcs per tube
250 pcs per Reel
MTBF R1Z (+25°C) using MIL-HDBK 217F 2203 x 10
3
hours
(+70°C) using MIL-HDBK 217F 391 x 10
3
hours
R1Z/P (+25°C) using MIL-HDBK 217F 2387 x 10
3
hours
(+70°C) using MIL-HDBK 217F 641 x 10
3
hours
Conducted / Radiated Emissions EN55022 Level A
EN General Safety Report: SPCLVD1211033-3 EN60950-1:2006 + A12:2011
EN Medical Safety Report: MDD1205098-4 + RM1205098-4 IEC/EN 60601-1 3rd Edition
Medical Report + ISO14971 Risk Assessment
UL General Safety Report: E358085 UL60950-1, 2nd Edition
For detailed information see Application Notes chapter "MTBF"
Description
The R1Z series DC/DC converter has been designed for isolating or converting DC power rails
where an SMD format with regulated output is required, although it is no larger than a
standard unregulated SMD converter.
Refer to Application Notes
RoHS
2011/65/EU
6/6
EN-60950-1 Certified
EN-60601-1 Certified*
UL-60950-1 Certified
(*/H suffix)
E358085
**Any data referred to in this datasheet are of indicative nature
and based on our practical experience only. For further details,
please refer to our Application Notes.
REV: 0/2015 E-119www.recom-power.com