Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
Lot. No.
R. Voltage code
Polarity marking(+)
S
W1
H
L
W
S
Surface Mount Type
Series : TPG
●
Small size, Low profi le (L3.5 × W 2.8 × H 1.1 mm)
●
Large capacitance (220 F max.)
●
RoHS compliance, Halogen free
Features
Size code B1G B15G
Category temperature range
–55 °C to +105 °C
Rated voltage range 2.5 V.DC to 12.5 V.DC 2.5 V.DC to 6.3 V.DC
Category voltage range 2.0 V.DC to 10.0 V.DC 2.0 V.DC to 5.0 V.DC
Rated capacitance range 33 µF to 220 µF 150 µF to 220 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+85 °C, 1000 h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan
d
< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan
d
< 1.5 times of the initial limit
DC leakage current
< 3 times of the initial limit
Size code L
+0.3
W
+0.3
H±0.1 S±0.2 W1±0.1
B1G 3.5 2.8 1.1 0.8 2.2
B15G 3.5 2.8 1.4 0.8 2.2
R. Voltage (V.DC)
2.5 4.0 6.3 8.0 10.0 12.5
Code eg j kAB
R. Cap. (F) 33 47 100 150 220
Code N7 S7 A8 E8 J8
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
✽1
current
(mAr.m.s.)
ESR
✽2
(mΩ max.)
tan d
✽3
LC
✽4
(µA)
Part number
Min.
Packaging Q'ty
(pcs)
TPG
2.5
85 2.0 105
220
3.5 2.8 1.1 B1G 1000 70 0.10 55.0
2R5TPG220M
2500
85 2.0 105 3.5 2.8 1.4
B15G
1400
30/300 kHz
0.10 110.0
2R5TPG220MUG
2500
4 85 3.2 105 220 3.5 2.8 1.4 1000 70 0.10 88.0
4TPG220M
2500
6.3
85 5.0 105
100
3.5 2.8 1.1
B1G
1000 70 0.10 63.0
6TPG100M
2500
85 5.0 105 3.5 2.8 1.1 1100 55 0.10 63.0
6TPG100MG
2500
85 5.0 105 3.5 2.8 1.1 1200
35/300 kHz
0.10 126.0
6TPG100MZGD
2500
85 5.0 105
150
3.5 2.8 1.4
B15G
1000 70 0.10 94.5
6TPG150M
2500
85 5.0 105 3.5 2.8 1.4 1200
35/300 kHz
0.10 189.0
6TPG150MZG
2500
8 85 6.3 105 47 3.5 2.8 1.1
B1G
1000 70 0.10 37.6
8TPG47M
2500
10 85 8.0 105 47 3.5 2.8 1.1 1000 70 0.10 47.0
10TPG47M
2500
12.5 85 10.0 105 33 3.5 2.8 1.1 1000 70 0.10 41.3
12TPG33M
2500
✽
1 Ripple current (100 kHz/ +45 °C ),
✽
2 ESR (100 kHz/+20 °C)
✽
3 tan
d
(120 Hz/+20 °C)
✽
4 After 5 minutes
◆
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
−0.1 −0.1
Marking
✽
Externals of fi gure are the reference.
Speci cations
Dimensions (not to scale)
Characteristics list
Nov. 201501
