PC910L0NSZ
Series
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC910L)
2. Approved by VDE (VDE0884) (as an option), file No.
87446 (as model No. PC910L)
3. Package resin : UL flammability grade (94V-0)
■ Features
■ Agency approvals/Compliance
1. High speed interfaces for computer peripherals
2. Programmable controllers
3. Inverter
■ Applications
High Speed 10Mb/s, High CMR
DIP 8 pin
∗
OPIC
Photocoupler
1. DIP 8 pin package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High speed response
(t
PHL
: TYP. 48 ns, t
PLH
: TYP. 50 ns)
4. Low input current drive (I
FHL
: MAX. 5 mA)
5. Instantaneous common mode rejection voltage
(CM
H
: MIN.10 kV/µs, CM
L
: MIN. −10 kV/µs)
6. TTL and LSTTL compatible output
7. High isolation voltage between input and output
(V
iso(rms)
: 5.0 kV)
■ Description
PC910L0NSZ Series contains a LED optically cou-
pled to an OPIC chip.
It is packaged in a 8 pin DIP.
Input-output isolation voltage(rms) is 5.0kV, High
speed response (TYP. 10 Mb/s) and CMR is MIN.
10 kV/µs.
1
Sheet No.: D2-A05601EN
Date Nov. 28. 2003
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PC910L0NSZ Series
∗
"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing
circuit integrated onto a single chip.
