OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AEDM-5810-J13

P1-P3P4-P6P7-P9
4
Electrical Characteristics
Electrical Characteristics over Recommended Operating Range
Parameter Symbol Min. Typ.* Max. Units Notes
Supply Current I
CC
25 80 mA No load
High Level Output Voltage V
OH
2.4 V I
OH
= -5 mA
Low Level Output Voltage V
OL
0.4 V I
OL
= 5 mA.
Rise Time t
r
10 ns C
L
= 100 pF
Fall Time t
f
10 ns C
L
= 100 pF
*Typical values specied at V
CC
= 5.0 V and 25°C.
Mechanical Characteristics
Parameter Symbol Dimension Tolerance
[1]
Units
Shaft Diameters Per ordering
information
g6 mm
(in)
Moment of Inertia J 0.6
(8.0 x 10-6)
g-cm2
(oz-in-s2)
Required Shaft Length
[2]
14.0
(0.55)
± 0.5
(± 0.02)
mm
(in.)
Bolt Circle
[3]
2 screw mounting 19.05
(0.750)
± 0.13
(± 0.005)
mm
(in.)
3 screw mounting 20.90
(0.823)
± 0.13
(± 0.005)
mm
(in.)
external mounting ears 46.0
(1.811)
± 0.13
(± 0.005)
mm
(in.)
Mounting Screw Size
[4]
2 screw mounting M 2.5 or (2-56) mm (in.)
3 screw mounting M 1.6 or (0-80) mm (in.)
external mounting ears M 2.5 or (2-56) mm (in.)
Encoder Base Plate Thickness 0.33 (0.130) mm (in.)
Hub Set Screw (2-56) (in.)
Notes:
1. These are tolerances required of the user.
2. The AEDM-5805, 5905 provide an 8.9 mm (0.35 inch) diameter hole through the housing for longer motor shafts. See Ordering Information.
3. The recommended mounting screw torque for 2 screw and external ear mounting is 1.0 kg-cm (0.88 in-lbs). The recommended mounting screw
torque for 3 screw mounting is 0.50 kg-cm (0.43 in-lbs).
5
Output Waveforms
Direction of Rotation: When the codewheel rotates in the counter-clockwise direction (as viewed from the encoder end
of the motor), channel A will lead channel B. If the codewheel rotates in the clockwise direction, channel B will lead
channel A.
P
C
CH. A
CH. B
ROTATION *
* SPIN DIRECTION FOLLOWS ARROW MARKING ON ENCODER
AMPLITUDE
φ
S1
S2
S4
CH. I
P
0
t
1
t
2
3
2
4
1
5
S3
6
Mounting Considerations
The AEDM-5xxx Series high resolution encoders must be aligned using the aligning pins as specied in Figure 2, or using
the HEDS-8910 Alignment Tool as shown in Encoder Mounting and Assembly.
The AEDM-58xx can be mounted to a motor using either the two screw or three screw mounting option as shown in
Figure 1. The optional aligning pins shown in Figure 2 can be used with either mounting option
The AEDM-59xx have external mounting ears which may be used for mounting to larger motor base plates. Figure 3
shows the necessary mounting holes with optional aligning pins and motor boss.
Index Pulse Width (PO): The number of electrical degrees that an index output is high during one full shaft rotation. This
value is nominally 90°e or 1/4 cycle.
Figure 1. Mounting Holes
Figure 3. Mounting with external ears
Figure 2. Optional Mounting Aids
r ∅ 0.05 A
j ∅ 0.15 A
A
MOTOR SHAFT
CENTER
∅2.44/2.41 (0.096/0095)
HEIGHT=0.76 (0.030)
0.25 (0.010)X45 ~ CHAMFER
2 PLACES
(0.006)
11.13/11.10
(0.438/0.437)
HEIGHT=2.5 (0.10)
0.8(0.03)X45 ~
CHAMFER
(0.002)
17.27 (0.680)
8.64 (0.680)
12.01 (0.473)
SHAFT LENGTH
SEE MECHANICAL
CHARACTERISTICS
R 0.13 (0.005)
MAX
j ∅ 0.25 A
j ∅ 0.25 A
A
3 SCREW MOUNTING
M1.6 (0-80 UNF-2B)
3 PLCS EQUALLY SPACED
ON 20.9 (0.823) DIA
BOLT CIRCLE
(0.010)
2 SCREW MOUNTING
M2.5(2-56 UNC-2B)
2 PLCS EQUALLY
SPACED ON
19.05(0.750) DIA
BOLT CIRCLE
MOTOR SHAFT CENTER
(0.010)
A
r ∅ 0.05 A
j ∅ 0.15 A
j ∅ 0.25 A
2 SCREW MOUNTING
M2.5(2-56 UNC-2B)
2 PLCS EQUALLY
SPACED ON
46.0(1.811) DIA
BOLT CIRCLE
(0.010)
∅ 2.44/2.41 (0.096/0095)
HEIGHT=0.76 (0.030)
0.25 (0.010)X45 ~ CHAMFER
2 PLACES
(0.006)
11.13/11.10
(0.438/0.437)
HEIGHT=2.5 (0.10)
0.8(0.03)X45 ~
CHAMFER
(0.002)
MOTOR SHAFT CENTER
17.27 (0.680)
8.64 (0.680)
12.01 (0.473)
R0.13 (0.005)
MAX
P1-P3P4-P6P7-P9

AEDM-5810-J13

Mfr. #:
Buy AEDM-5810-J13
Manufacturer:
Broadcom / Avago
Description:
Encoders Kit En F CW 3Ch 1024CPR 8mm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet