Low Noise, Micropower
5.0 V Precision Voltage Reference
ADR293-EP
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2010 Analog Devices, Inc. All rights reserved.
FEATURES
6.0 V to 15 V supply range
Supply current: 15 μA maximum
Low noise: 15 μV p-p typical (0.1 Hz to 10 Hz)
High output current: 5 mA
Pin-compatible with the REF02/REF19x
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC
standard)
Military temperature range (−55°C to +125°C)
Controlled manufacturing baseline
1 assembly/test site
1 fabrication site
Enhanced product change notification
Qualification data available on request
APPLICATIONS
Portable instrumentation
Precision reference for 5 V systems
ADC and DAC reference
Solar-powered applications
PIN CONFIGURATION
TOP VIEW
(Not to Scale)
1
2
3
4
ADR293-EP
V
IN
NC
GND
NC
8
7
6
5
NC
V
OUT
NC
NC
NC = NO CONNECT
09356-002
Figure 1. 8-Lead TSSOP (RU-8)
GENERAL DESCRIPTION
The ADR293-EP is a low noise, micropower precision voltage
reference that utilizes an XFET® (eXtra implanted junction FET)
reference circuit. The XFET architecture offers significant
performance improvements over traditional band gap and
buried Zener-based references. Improvements include one
quarter the voltage noise output of band gap references
operating at the same current, very low and ultralinear
temperature drift, low thermal hysteresis, and excellent long-
term stability.
The ADR293-EP is a series voltage reference providing stable
and accurate output voltage from a 6.0 V supply. Quiescent
current is only 15 μA maximum, making this device ideal for
battery powered instrumentation. The temperature coefficient
is 30 ppm/°C maximum over the military temperature range,
and the initial error is only 0.2% at 25°C. Line regulation and
load regulation are typically 70 ppm/V and 30 ppm/mA,
respectively, maintaining the reference’s overall high
performance.
The ADR293-EP is specified over the military temperature
range of –55°C to +125°C. This device is available in an 8-lead
TSSOP package.
Additional applications information is available in the ADR293
data sheet.
