MP6529 – 5V TO 35V, THREE-PHASE BLDC MOTOR PRE-DRIVER
MP6529 Rev. 1.0 www.MonolithicPower.com 3
10/26/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
PACKAGE REFERENCE
TOP VIEW TOP VIEW
QFN-28 (4mmx4mm) TSSOP-28 EP (9.7mmx6.4mm)
ABSOLUTE MAXIMUM RATINGS
(1)
Input voltage (V
IN
) ...........................-0.3V to 40V
CPA ................................................-0.3V to 40V
CPB .............................................-0.3V to 12.5V
VREG..............................................-0.3V to 13V
BSTA/B/C .......................................-0.3V to 55V
GHA/B/C .........................................-0.3V to 55V
SHA/B/C .........................................-0.3V to 40V
GLA/B/C..........................................-0.3V to 13V
All other pins to AGND...................-0.3V to 6.5V
Continuous power dissipation (T
A
= +25°C)
(2)
QFN-28 (4mmx4mm)………………….…...2.9W
TSSOP-28 EP (9.7mmx6.4mm)………....3.9W
Storage temperature................ -55°C to +150°C
Junction temperature ..............................+150°C
Lead temperature (solder) ......................+260°C
Recommended Operating Conditions
(3)
Input voltage (V
IN
) ...............................5V to 35V
OC_REF voltage (V
OC
) ...............0.125V to 2.4V
Operating junct. temp (T
J
)........ -40°C to +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
QFN-28 (4mmx4mm)...........…...42.... .9 ... °C/W
TSSOP-28 EP (9.7mmx6.4mm)..32 ... .6 ... °C/W
NOTES:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX) = (T
J
(MAX)-T
A
)/θ
JA
. Exceeding the maximum allowable powe
dissipation produces an excessive die temperature, causing
the regulator to go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.