CAT5111
http://onsemi.com
13
Example of Ordering Information (Note 13)
Prefix Device # Suffix
Company ID
CAT 5111 V
Product Number
5111
I − GT3
Package
I = Industrial (−40°C to +85°C)
Temperature Range
L: PDIP
V: SOIC
Y: TSSOP
Z: MSOP
G: NiPdAu
Blank: Matte−Tin
T: Tape & Reel
3: 3,000 Units / Reel
Tape & Reel (Note 14)
(Optional)
−10
Resistance
−10: 10 kW
−50: 50 kW
−00: 100 kW
Lead Finish (Notes 11, 12)
Table 7. ORDERING INFORMATION
Orderable Part Number
Resistance (kW)
Package−Pins Lead Finish
CAT5111LI−10−G 10
PDIP−8 NiPdAu
CAT5111LI−50−G 50
CAT5111LI−00−G 100
CAT5111VI−10−GT3 10
SOIC−8 NiPdAu
CAT5111VI−50−GT3 50
CAT5111VI−00−GT3 100
CAT5111YI−10−GT3 10
TSSOP−8 NiPdAu
CAT5111YI−50−GT3 50
CAT5111YI−00−GT3 100
CAT5111ZI−10−T3 10
MSOP−8 Matte−Tin
CAT5111ZI−50−T3 50
CAT5111ZI−00−T3 100
10.All packages are RoHS compliant.
11. Standard lead finish is NiPdAu, except MSOP package is Matte−Tin.
12.Contact factory for Matte−Tin finish availability for PDIP, SOIC and TSSOP packages.
13. The device used in the above example is a CAT5111VI−10−GT3 (SOIC, Industrial Temperature, 10 kW, NiPdAu, Tape & Reel, 3,000/Reel).
14.For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
CAT5111/D
DPP is a trademark of Semiconductor Components Industries, LLC.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
