OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FTLX1812M3BCL

P1-P3P4-P6P7-P9P10-P11
Finisar Corporation August 2015Rev D1 Page 1
Product Specification
10Gb/s 80km Multi-Rate XFP Optical Transceiver
FTLX1812M3BCL
PRODUCT FEATURES
• Supports 9.95Gb/s to 11.35Gb/s
bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• RoHS-6 compliant (lead-free)
• Temperature-stabilized EML
transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• XFI Loop-back Support
• Temperature range: 0°C to 70°C
APPLICATIONS
• SONET OC-192 / SDH STM-64
ITU-T G.959.1 P1L1-2D2
• IEEE 802.3ae 10GBASE-ZR/ZW
80km 10G Ethernet
• Extended 80km, 10GFC 1200-SM-LL-L
• Supports OTN/ITU-T G.709 FEC rates
Finisar’s 80km FTLX1812M3BCL Small Form Factor 10Gb/s (XFP) transceivers comply with
the current XFP Multi-Source Agreement (MSA) Specification
1
. They are a true multi-protocol
transceiver complying with 80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1: P1L1-
2D2, and also support 10GBASE-ZR/ZW 80km 10-Gigabit Ethernet, 10-Gigabit Fibre Channel
1200-SM-LL-L, and all related ITU-T G.709 FEC (OTN) data rates. Digital diagnostics functions
are available via a 2-wire serial interface, as specified in the XFP MSA.
The optical
transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application
Note AN-2038 for more details.
PRODUCT SELECTION
FTLX1812M3BCL
FTLX1812M3BCL - Product Specification – August 2015
Finisar Corporation August 2015Rev D1 Page 2
I. Pin Descriptions
Pin
Logic
Symbol
Name/Description
Ref.
1
GND
Module Ground
1
2
VEE5
Optional –5.2 Power Supply – Not required
3
LVTTL-I
Mod-Desel
Module De-select; When held low allows the module to
respond to 2-wire serial interface commands
4
LVTTL-O
Interrupt
Interrupt (bar); Indicates presence of an important condition
which can be read over the serial 2-wire interface
2
5
LVTTL-I
TX_DIS
Transmitter Disable; Transmitter laser source turned off
6
VCC5
+5 Power Supply
7
GND
Module Ground
1
8
VCC3
+3.3V Power Supply
9
VCC3
+3.3V Power Supply
10
LVTTL-I
SCL
Serial 2-wire interface clock
2
11
LVTTL-
I/O
SDA
Serial 2-wire interface data line
2
12
LVTTL-O
Mod_Abs
Module Absent; Indicates module is not present. Grounded
in the module.
2
13
LVTTL-O
Mod_NR
Module Not Ready; Finisar defines it as a logical OR
between RX_LOS and Loss of Lock in TX/RX.
2
14
LVTTL-O
RX_LOS
Receiver Loss of Signal indicator
2
15
GND
Module Ground
1
16
GND
Module Ground
1
17
CML-O
RD-
Receiver inverted data output
18
CML-O
RD+
Receiver non-inverted data output
19
GND
Module Ground
1
20
VCC2
+1.8V Power Supply – Not required
21
LVTTL-I
P_Down/RST
Power Down; When high, places the module in the low
power stand-by mode and on the falling edge of P_Down
initiates a module reset
Reset; The falling edge initiates a complete reset of the
module including the 2-wire serial interface, equivalent to a
power cycle.
22
VCC2
+1.8V Power Supply – Not required
23
GND
Module Ground
1
24
PECL-I
RefCLK+
Reference Clock non-inverted input, AC coupled on the
host board – Not required
25
PECL-I
RefCLK-
Reference Clock inverted input, AC coupled on the host
board – Not required
26
GND
Module Ground
1
27
GND
Module Ground
1
28
CML-I
TD-
Transmitter inverted data input
29
CML-I
TD+
Transmitter non-inverted data input
30
GND
Module Ground
1
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Open collector; should be pulled up with 4.7k – 10kohms on host board to a voltage between 3.15V
and 3.6V.
FTLX1812M3BCL - Product Specification – August 2015
Finisar Corporation August 2015Rev D1 Page 3
Diagram of Host Board Connector Block Pin Numbers and Names
II. Absolute Maximum Ratings
Parameter
Min
Typ
Unit
Ref.
Maximum Supply Voltage #1
-0.5
V
Maximum Supply Voltage #2
-0.5
V
Storage Temperature
-40
°C
Case Operating Temperature
0
°C
Receiver Damage Threshold
dBm
1
Note #1: spec based on steady-state optical power.
P1-P3P4-P6P7-P9P10-P11

FTLX1812M3BCL

Mfr. #:
Buy FTLX1812M3BCL
Manufacturer:
Finisar Corporation
Description:
Fiber Optic Transmitters, Receivers, Transceivers Multi-rate trnscvr single mode, 3.3/5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet