Type FCP Surface Mount Film Capacitors
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Stable Stacked Metallized Film (PPS) Chips for Reow Soldering
Highlights
- Stacked metallized polyphenylene sulde (PPS) lm.
- High operating temperature to +125 ºC
- High capacitance per unit volume
- Excellent high frequency performance
- Typical ΔC from –55 ºC to 105 ºC ≤ ±1.5%
- Stable cap and DF over wide temperature range
Specications
The Type FCP’s combination of high capacitance density and
excellent high frequency response makes it a great choice for
wireless and instrumentation applications.
Type FCP stacked metallized polyphenelene sulfide (PPS)
lm capacitors oer high capacitance per unit volume, stable
capacitance and DF over a wide temperature range, and
excellent high frequency performance. Type FCP capacitors
conform to standard EIA 0603, 0805, 1206, 1210, 1913 & 2416
surface mount case sizes and are packaged on tape and reel.
Capacitance Range 100 pF to 0.22 µF (1kHz at ≤5 Vrms)
Capacitance Tolerance ±5% (J) Standard, ±2% (G) Optional
Rated Voltage 16 Vdc and 50 Vdc
Dissipation Factor (Tan δ) 0.6% Max. (1 kHz at ≤5 Vrms)
Operating Temperature Range –55 ºC to +125 ºC (See Voltage derating chart for 0.12 - 0.22 µF
above 105 ºC)
Dielectric Strength 150% of rated Vdc for 60 s
Insulation Resistance 3000 MΩ Min. at 20 ºC, after 60 s (16 Vdc rated, test 10 Vdc; 50 Vdc
rated, test 50 Vdc)
Construction Stacked metallized polyphenylene sulde (PPS) lm. Terminations
are lead free with a Sn-Ag-Cu solder nish.
Life Test Capacitors subjected to 1000 hours of maximum rated tempera-
ture and 125% of the rated voltage will not have any signicant
visual damage, thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%, and IR will be a
minimum of 1000 Megohms.
Resistance to Soldering Heat Capacitors subjected to a maximum of 260 °C reow soldering
process will not have any signicant visual damage, the dielectric
strength will be as specied, the capacitance will be within ±3% of
the initial measured value, DF will be a maximum of .66%, and IR
will be a minimum of 1000 Megohms.
Moisture Resistance Capacitors subjected to 1000 h at 40 °C and 90% to 95% RH and
rated voltage will not have any signicant visual damage, will
withstand 1.3 times the rated voltage for one minute, the capaci-
tance will be within ±2% of the initial measured value, DF will be a
maximum of 0.9%, and IR will be a minimum of 1000 Megohms.
RoHS Compliant
