HY
–2–
ASCTB212E 201503-T
RATING
1. Coil data
2. Specifications
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied
voltage
(at 70°C 158°F)
1 Form C
1.5V DC
75%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
100mA 15Ω
150mW
140%V of
nominal voltage
3V DC 50mA 60Ω
4.5V DC 33.3mA 135Ω
5V DC 30mA 166Ω
6V DC 25mA 240Ω
9V DC 16.7mA 540Ω
12V DC 12.5mA 960Ω
24V DC 6.25mA 3,840Ω
1.5V DC
75%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
133.3mA 11.25Ω
200mW
120%V of
nominal voltage
3V DC 66.7mA 45Ω
4.5V DC 44.5mA 101.2Ω
5V DC 40mA 125Ω
6V DC 33.3mA 180Ω
9V DC 22.2mA 405Ω
12V DC 16.7mA 720Ω
24V DC 8.3mA 2,880Ω
Characteristics Item Specifications
Contact
Arrangement 1 Form C
Initial contact resistance, max. Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact material Ag+Au clad
Rating
Nominal switching capacity 1 A 30 V DC (resistive load)
Max. switching power 30 W (DC) (resistive load)
Max. switching voltage 60 V DC
Max. carrying current 2 A
Max. switching current 1 A (30 V DC)
Min. switching capacity (Reference value)*
1
1mA 1 V DC
Nominal operating power 150/200mW
Electrical
characteristics
Insulation resistance (Initial)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 500 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA)
Temperature rise (at 20°C 68°F)
Max. 50°C
(By resistive method, nominal coil voltage applied to the coil, nominal switching capacity.)
Operate time [Set time] (at 20°C 68°F) Max. 5 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C 68°F)
Max. 4 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock resistance
Functional Min. 98 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Destructive Min. 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 2 mm
Expected life
Mechanical Min. 10
7
(at 180 cpm)
Electrical Min. 10
5
(1 A 30 V DC resistive) (at 20 cpm)
Conditions
Conditions for operation, transport and storage*
2
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 cpm
Unit weight Approx. 1.8 g .063 oz
