ICS511
LOCO™ PLL CLOCK MULTIPLIER CLOCK MULTIPLIER
IDT™ / ICS™
LOCO™ PLL CLOCK MULTIPLIER 9
ICS511 REV J 092209
Ordering Information
*NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
“LF” designates Pb (lead) free packaging.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result
from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial
applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary
environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or
critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
511M* ICS511M Tubes 8-pin SOIC 0 to +70° C
511MT* ICS511M Tape and Reel 8-pin SOIC 0 to +70
° C
511MI* ICS511I Tubes 8-pin SOIC -40 to +85
° C
511MIT* ICS511I Tape and Reel 8-pin SOIC -40 to +85
° C
511MLF 511MLF Tubes 8-pin SOIC 0 to +70
° C
511MLFT 511MLF Tape and Reel 8-pin SOIC 0 to +70
° C
511MILF 511MILF Tubes 8-pin SOIC -40 to +85
° C
511MILFT 511MILF Tape and Reel 8-pin SOIC -40 to +85
° C
511-DWF - Die on uncut, probed wafers 0 to +70
° C
511-DPK - Tested die in waffle pack 0 to +70
° C
