MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating
Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
200 400 600 V
Average Rectified Forward Current @ 145°C
Total Device
I
F(AV)
15
30
A
Peak Repetitive Surge Current
(Rated V
R
, Square Wave, 20 kHz, T
C
= 145°C)
I
FM
30 A
Nonrepetitive Peak Surge Current (Surge applied at rated load
conditions, halfwave, single phase, 60 Hz)
I
FSM
200 150 150 A
Operating Junction and Storage Temperature T
J
, T
stg
− 65 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg)
Rating
Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Maximum Thermal Resistance,
− Junction−to−Case
− Junction−to−Ambient
R
q
JC
R
q
JA
1.5
40
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Rating Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Maximum Instantaneous Forward Voltage (Note 1)
(I
F
= 15 Amp, T
C
= 150°C)
(I
F
= 15 Amp, T
C
= 25°C)
V
F
0.85
1.05
1.12
1.25
1.4
1.7
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, T
J
= 150°C)
(Rated DC Voltage, T
J
= 25°C)
i
R
500
10
500
10
1000
10
mA
Maximum Reverse Recovery Time (i
F
= 1.0 A, di/dt = 50 Amps/ms)
t
rr
35 60 60 ns
Typical Peak Reverse Recovery Current
(I
F
= 1.0 A, di/dt = 50 A/ms)
I
RM
0.7 A
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
