OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

B81123C1102M000

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19
Overview of available types
Lead spacing 15 mm 22.5 mm
C
R
(µF)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0056
0.0068
0.010
Ordering codes and packing units
Lead spacing
mm
C
R
µF
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
M = ±20% 289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
003 = Straight terminals, untaped (lead length
3.2 ±0.3 mm)
000 = Straight terminals, untaped (lead length
6 - 1 mm)
15 0.0010 5.0 × 10.5 × 18.0 B81123C1102M*** 4680 5200 4000
0.0015 6.0 × 11.0 × 18.0 B81123C1152M*** 3840 4400 4000
0.0022 7.0 × 12.5 × 18.0 B81123C1222M*** 3320 3600 4000
0.0033 8.5 × 14.5 × 18.0 B81123C1332M*** 2720 2800 2000
0.0047 9.0 × 17.5 × 18.0 B81123C1472M*** 2560 2800 2000
22.5 0.0056 7.0 × 16.0 × 26.5 B81123C1562M*** 2320 2400 2520
0.0068 8.5 × 16.5 × 26.5 B81123C1682M*** 1920 2000 2040
0.010 10.5 × 18.5 × 26.5 B81123C1103M*** 1560 1600 2160
B81123
Y1 / 500 V AC
Page 4 of 19Please read Cautions and warnings and
Important notes at the end of this document.
Technical data
Reference standard: IEC / UL 60384-14. All data given at T = 20 °C unless otherwise specified.
Max. operating temperature T
op,max
+110 °C
Dissipation factor tan δ (in 10
-3
)
at 1 kHz 1.0
at 20 °C (upper limit values) 100 kHz 5.0
Insulation resistance R
ins
30 000 MΩ
or time constant τ = C
R
R
ins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
4800 V, 2 s
The repetition of this DC voltage test may damage the capacitor. Special care must be taken in
case of use several capacitors in a parallel configuration.
Passive flammability category B
Maximum continuous AC voltage V
AC
750 V (50/60 Hz)
Rated AC voltage (UL60384) 500 V (50/60 Hz)
Maximum continuous DC voltage V
DC
3000 V
T
op
≤ 110 °C V
op
= V
AC
(continuously)
temperature
T
op
≤ 110 °C V
op
= 1.25 V
AC
(1000 h)
Damp heat test 56 days / 40 °C / 93% relative humidity
Limit values after damp heat test Capacitance change ∆C/C ≤ 5%
Dissipation factor change ∆ tan δ ≤ 0.5 10
-3
(at 1 kHz)
Insulation resistance R
ins
≤ 1.0 10
-3
(at 100 kHz)
or time constant τ = C
R
R
ins
≥ 50% of minimum
as-delivered values
B81123
Y1 / 500 V AC
Page 5 of 19Please read Cautions and warnings and
Important notes at the end of this document.
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k
0
" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V
2
/µs.
Note:
The values of dV/dt and k
0
provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k
0
values
Lead spacing 15 mm 22.5 mm
dV/dt in V/µs 3 000 1 000
k
0
in V
2
/µs 2 100 000 700 000
Impedance Z versus frequency f
(typical values)
B81123
Y1 / 500 V AC
Page 6 of 19Please read Cautions and warnings and
Important notes at the end of this document.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19

B81123C1102M000

Mfr. #:
Buy B81123C1102M000
Manufacturer:
EPCOS / TDK
Description:
Cap Film Suppression Y1 0.001uF 250VAC PP 20% (18 X 5 X 10.5mm) Radial 15mm 100C Bulk
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet