HMC641LP4ETR

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
0 - 4
HMC641LP4E
v02.0 611
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[1]
HMC641LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H641
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reow temperature of 260 °C
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED LAND PATTERN.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
0 - 5
HMC641LP4E
v02.0 611
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 5, 6, 13, 18 N/C
These pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
2, 4, 7, 9, 10, 12,
17, 19, 21, 22, 24
Ground Paddle
GND
These pins and the exposed ground paddle
must be connected to RF/DC ground.
3 RFC
This pin is DC coupled and matched to
50 Ohms. A blocking capacitor is required if
RF line potential is not equal to 0V.
8 RF4
This pin is DC coupled and matched to
50 Ohms. A blocking capacitor is required if
RF line potential is not equal to 0V.
11 RF3
This pin is DC coupled and matched to
50 Ohms. A blocking capacitor is required if
RF line potential is not equal to 0V.
14 Vss Supply Voltage -5 Vdc ± 10%.
15 CTRLB See Truth Table and Control Voltage Table.
16 CTRLA See Truth Table and Control Voltage Table.
20 RF2
This pin is DC coupled and matched to
50 Ohms. A blocking capacitor is required if
RF line potential is not equal to 0V.
23 RF1
This pin is DC coupled and matched to
50 Ohms. A blocking capacitor is required if
RF line potential is not equal to 0V.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
0 - 6
HMC641LP4E
v02.0 611
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
Evaluation PCB
List of Materials for Evaluation PCB 126511
[1]
Item Description
J1 - J5 PCB Mount SMA Connector
J6 - J9 DC Pin
C1 1000 pF Capacitor, 0402 Pkg.
U1 HMC641LP4E Switch
PCB
[2]
126508 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon FR4
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC641LP4ETR

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
IC RF SWITCH SP4T 20GHZ 24SMT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet