OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APTF1616LSEEZGKQBKC

P1-P3P4-P6P7-P7
SPEC NO: DSAO4453 REV NO: V.2B DATE: SEP/18/2015 PAGE: 1 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203013691
1.6x1.6mm FULL-COLOR SURFACE MOUNT
LED
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APTF1616LSEEZGKQBKC
Hyper Red
Green
Blue
Features
z 1.6mmX1.6mm SMD LED, 0.7mm thickness.
z Low power consumption.
z Can produce any color in visible spectrum, including
white light.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Low current IF=2mA operating.
z RoHS compliant.
Descriptions
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO4453 REV NO: V.2B DATE: SEP/18/2015 PAGE: 2 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203013691
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTF1616LSEEZGKQBKC
Hyper Red (AlGaInP)
Water Clear
6 15
Green (InGaN) 20 50
Blue (InGaN) 6 14
120
°
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Hyper Red
Green
Blue
630
515
460
nm I
F=2mA
λD [1] Dominant Wavelength
Hyper Red
Green
Blue
621
525
465
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Hyper Red
Green
Blue
20
35
25
nm I
F=2mA
C Capacitance
Hyper Red
Green
Blue
25
45
100
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Hyper Red
Green
Blue
1.8
2.65
2.65
2.1
3.1
3.1
V IF=2mA
I
R Reverse Current
Hyper Red
Green
Blue
10
50
50
uA VR=5V
Parameter Hyper Red Green Blue Units
Power dissipation 63 77.5 93 mW
DC Forward Current 30 25 30 mA
Peak Forward Current [1] 195 150 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM)
3000 450 250 V
SPEC NO: DSAO4453 REV NO: V.2B DATE: SEP/18/2015 PAGE: 3 OF 7
APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203013691
APTF1616LSEEZGKQBKC
Hyper Red
P1-P3P4-P6P7-P7

APTF1616LSEEZGKQBKC

Mfr. #:
Buy APTF1616LSEEZGKQBKC
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 1.6x1.6MM LOW CU RGB SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet