OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

F339MX244731MI02W0

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20
F339M X2
www.vishay.com
Vishay BCcomponents
Revision: 17-Jan-17
13
Document Number: 28166
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to Packaging Information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped in addition
Space Requirements on Printed Circuit-Board
The maximum space for length (I
max.
), width (W
max.
), and height (h
max.
) of film capacitors to take in account on the printed circuit
board is shown in the drawings:
• For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm and h = 0.1 mm
• For products with pitch = 37.5 mm, w = l = 0.7 mm; h = 0.5 mm
• For products with pitch = 52.5 mm, w = l = 1.0 mm and h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
•T
stg
= -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric
pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
APPROVALS
SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
310 V
AC
1 nF to 40 µF 40028493 www.vishay.com/doc?28215
UL 60384-14 310 V
AC
1 nF to 40 µF E354331
www.vishay.com/doc?28216
CSA-E384-14 310 V
AC
1 nF to 40 µF E354331
CQC 310 V
AC
1 nF to 40 µF
10001041904 (L) www.vishay.com/doc?28217
10001041903 (F) www.vishay.com/doc?28237
CB - Test certificate 310 V
AC
1 nF to 40 µF DE-41725 www.vishay.com/doc?28214
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech.Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
CBA116
Eccentricity
w
max.
= W + Δ
h
max.
= h + Δ
I
max.
= I + Δ
Seating plane
F339M X2
www.vishay.com
Vishay BCcomponents
Revision: 17-Jan-17
14
Document Number: 28166
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
Max. RMS voltage as a function of frequency Max. RMS current as a function of frequency
-50 0
50
100
T
amb
(°C)
-4
-6
-2
0
2
4
ΔC/C (%)
typical
typical
max.
min.
f (Hz)
10
6
10
4
10
5
10
7
10
8
1 nF
4.7 nF
10 nF
47 nF
100 nF
470 nF
1 µF
4.7 µF
10 µF
40 µF
10
-2
10
-1
10
0
10
1
10
2
10
3
Impedance (Ω)
Dissipation factor (x 10
-4
)
10
3
10
2
10
1
10
0
10
1
10
2
10
3
10
4
10
5
f (Hz)
C ≥ 10 µF
C ≤
10 nF
220 nF < C ≤ 1 µF
47 nF < C ≤ 220 nF
10 nF < C ≤ 47 nF
10
-1
10
1
10
1
10
0
10
2
10
3
10
4
10
5
10
0
10
2
f (MHz)
C (nF)
X2
T
amb
≤
110 °C
AC voltage
(V)
10
3
10
2
10
1
f (Hz)
10
1
10
2
10
3
10
4
10
5
10
3
10
4
10
5
10
6
f (Hz)
10
0
10
2
10
1
10
3
10
4
AC current (mA)
40 µF
10 µF
4.7 µF
1 µF
470 nF
100 nF
47 nF
10 nF
4.7 nF
1 nF
F339M X2
www.vishay.com
Vishay BCcomponents
Revision: 17-Jan-17
15
Document Number: 28166
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Insulation resistance as a function of ambient temperature
(typical curve)
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum
mains voltage of 310 V
AC
.
• For series impedance applications we refer to application note www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C.
• Rated voltage pulse slope:
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 V
DC
and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC 60384-14 ed-4 (2013) and
Specific Reference Data.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapters “General data” of
this specification
Initial measurements Capacitance
Tangent of loss angle:
for C 1 µF at 10 kHz or
for C > 1 µF at 1 kHz
4.3 Robustness of terminations Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
4.4 Resistance to soldering heat No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.19 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
10
6
10
5
10
4
0
20 40 60
80
100
T
amb
(°C)
RC (s)
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20

F339MX244731MI02W0

Mfr. #:
Buy F339MX244731MI02W0
Manufacturer:
Description:
Safety Capacitors MKP 0.47 F 20% 310VacX2 (M) e3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet