© 2011 Cooper Bussmann
www.cooperbussmann.com
0111 BU-SB11020 Page 4 of 4 Data Sheet 4401
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-
port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result
in significant injury to the user.
Packaging/Taping Specifications
IEC Dimension Tolerance
Description Mark (mm) (mm)
Sprocket hole pitch P0 12.7 0.3
Ordinate to adjacent component lead
PTR060V0010~PTR060V0090 P
1
3.6 ±1.0
Ordinate to adjacent component lead
PTR060V0110~PTR060V0185 P
1
3.45 ±1.0
Ordinate to adjacent component lead
PTR060V0250~PTR060V0300 P
1
7.3 ±1.0
Device pitch PTR060V0010~PTR060V0090 P 12.7 ±1.0
Device pitch PTR060V0110~PTR060V0300 P 25.4 ±1.0
Device pitch PTR060V0375 P 38.1 ±1.0
Lead spacing C * --
Carrier tape width W 18 ±1.0
Top distance between tape edges W
0
3.0 Max.
Hold-down tape width W
1
12 ±1.0
Sprocket hole position W
2
9.0 +0.75/-0.5
Abscissa to top PTR060V0010~PTR060V0090 H
1
32.2 Max.
Abscissa to top PTR060V0110~PTR060V0300 H
1
47.5 Max.
Abscissa to plane (straight lead) H 18.0 +2/-0
Abscissa to plane (kinked lead) H
0
16.0 ±0.5
Sprocket hole diameter D
0
4 ±0.2
Lead protrusion L
1
1 Max.
Tape thickness t 0.9 Max.
Body lateral deviation Δh 0 ±1.0
Body tape plane deviation Δp 0 ±1.3
Reel width W
3
56 Max.
Reel diameter 340 ±10
Arbor hole diameter n
0
31 ±1
Core diameter n 80 Min.
* See Dimensions table.
Figure 2 - PTR060V0250-PTR060V0375
Figure 1 - PTR060V0010-PTR060V0185
Reel Specifications
