Innovative Technology
for a Connected World
Tgon
TM
800 Series
Electrically and Thermally
Conductive Interface Pad
THR-DS-Tgon-800 1109
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with
the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or
general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy
of which will be furnished upon request. © Copyright 2009 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc.
or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. A13515-00 Rev I 11/2009
STANDARD THICKNESSES
0.005” (0.13mm), 0.010” (0.25mm), 0.020” (0.51mm)
Consult the factory for alternate thicknesses.
STANDARD SHEET SIZE
18” x 24” (457mm x 609.6mm)
Tgon™ 800 sheets are supplied with no liners when ordered without adhesive.
With adhesive, they are supplied with no top liner and white release liner on the bottom.
Tgon™ 800 is available on rolls and individual die cut shapes.
PRESSURE SENSITIVE ADHESIVE
Request no adhesive with “AO” suffix.
Request adhesive on one side with “A1” suffix.
Striped adhesive option on one side designated with SA.
Double-sided adhesive is not available.
TGON
TM
800 TYPICAL PROPERTIES
Construction & Composition Flexible Graphite Flexible Graphite Flexible Graphite
Color Pewter Pewter Pewter Visual
Thickness 0.005" (0.13mm) 0.010" (0.25mm) 0.020" (0.51mm)
Thickness Tolerance ± 0.001"
(± 0.025mm)
± 0.001"
(± 0.025mm)
± 0.002"
(± 0.05mm)
Density 2.20 g/cc 2.20 g/cc 2.20 g/cc Helium Pycnometer
Hardness 85 Shore A 85 Shore A 85 Shore A ASTM D2240
Tensile strength 650 psi 650 psi 650 psi ASTM D412
Outgassing TML 0.15% 0.15% 0.15% ASTM E595
Outgassing CVCM 0.09% 0.09% 0.09% ASTM E595
UL Flammability rating 94 VO 94 VO 94 VO
Temperature range -240°C to 300°C -240°C to 300°C -240°C to 300°C
Thermal conductivity - Z Axis 5 W/mK 5 W/mK 5 W/mK ASTM D5470 (modied)
Thermal conductivity - XY Axis 240 W/mK 240 W/mK 240 W/mK ASTM D5470 (modied)
Thermal resistance @ 100 psi 0.07 °C-in
2
/W 0.10 °C-in
2
/W 0.17 °C-in
2
/W ASTM D5470 (modied)
Thermal resistance @ 681 KPa 0.42 °C-cm
2
/W 0.66 °C-cm
2
/W 1.07 °C-cm
2
/W ASTM D5470 (modied)
Volume resistivity (In-Plane) 11 x 10
-5
ohm-cm 11 x 10
-5
ohm-cm 11 x 10
-5
ohm-cm ASTM D257
