https://www.phoenixcontact.com/pi/products/1424693
08/21/2018Page2/4
Connector-SACC-M12FS-4PL-1424693
Technical data
General
Rated current at 40°C 4 A
Rated voltage 250 V
Number of positions 4
Color handle area black
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Push-in connection
Conductor cross section 0.14 mm² ... 0.75 mm² (without ferrule)
0.08 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (solid)
Conductor cross section AWG 26 ... 18 (without ferrule)
28 ... 20 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
0.4 Nm (Connector with coupling sleeve)
1.5 Nm (Pressure nut with coupling sleeve)
Assembly instructions The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 V0
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material of grip body PA 6.6
Material, knurls Plastic
Sealing material NBR
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings