4
Device Selection Guide (T
J
= 25 °C)
Part Number Color
Luminous Flux (lm) / Radiometric Power
(mW), Φ
V
[1,2]
Test Current
(mA)
Dice
Technology
Electrically
Isolated
Metal Slug Min. Typ. Max.
ASMT-JR10-AST01 Red 51.7 62.0 87.4 350 AllnGaP No
ASMT-JA10-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No
ASMT-JH10-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No
ASMT-JB11-NNQ01 Blue 18.1 24.0 39.8 350 InGaN Yes
ASMT-JL11-NNQ01 Royal Blue 275 mW 355 mW 515 mW 350 InGaN Yes
ASMT-JL11-NPR01 355mW 515mW 635mW 350 InGaN Yes
ASMT-JC11-NTU01 Cyan 67.2 75.0 99.6 350 InGaN Yes
ASMT-JG11-NUW01 Green 87.4 110.0 129.5 350 InGaN Yes
ASMT-JW11-NWX01 Cool White 113.6 120.0 147.7 350 InGaN Yes
ASMT-JN11-NWX01 Neutral White 113.6 120.0 147.7 350 InGaN Yes
ASMT-JY11-NVW01 Warm White 99.6 105.0 129.5 350 InGaN Yes
Notes:
1. Φ
V
is the total luminous ux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition.
2. Flux tolerance is ±10%.
Absolute Maximum Ratings
Parameter AllnGaP InGaN InGaN Cyan Units
DC Forward Current
[1]
500 500 500 mA
Peak Pulsing Current
[2]
1000 1000 1000 mA
Power Dissipation 1230 1830 1980 mW
LED Junction Temperature 125 150 150 °C
Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +135 -40 to +135 °C
Storage Temperature Range -40 to +120 -40 to +120 -40 to +120 °C
Soldering Temperature See Figure 26
Reverse Voltage
[3]
Not recommended
Notes:
1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN.
2. Pulse condition duty factor = 10%, Frequency = 1 kHz.
3. Not designed for reverse bias operation.