www.clare.com
LIA101
Rev. X
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Supply Voltages ± 5 - ±18 V
Differential Input Voltage - - ± 30 V
Output Short Circuit Duration Continuous -
Total Package Dissipation - - 11 W
Isolation Voltage
Input to Output 3750 - - V
RMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1
Above 25°C Derate Linearly 1.67mW/°C
Electrical Characteristics @ TA = +25°C and
±VCC = 15VDC (unless otherwise specified)
PARAMETERS CONDITIONS MIN TYP MAX UNITS
Isolation
Continuous Voltage, AC - - - 3750 V
RMS
Input to Output Leakage Current 1000V
RMS
, 60Hz - 0.2 - µA
RMS
Offset Voltage
Output Offset Voltage (VOS) R
F
=R
IN
=51KΩ, K3=1.000 - 50 - mV
Input Grounded T
A
=25°C
Amplifier Input Impedance - - 10
12
|| 3 - Ω || pF
∆VOS/∆T Average TC of Input
Offset Voltage R
S
=50Ω -5-µV/°C
(Input and Output Stage)
Common Mode Rejection Ratio, CMRR 60Hz, R
F
=1MΩ - 100 - dB
R
IN
=10KΩ, Gain=100
Input Offset Voltage R
S
=50Ω, T
A
=25°C - 3 10 mV
Common Mode Range ±12 - - V
Frequency Response
Bandwidth - - 40 - kHz
Slew Rate 0-10V Step Input - 0.3 - V/µs
Non-Linearity F
O
=300Hz, -10dBm - - 0.01 %
Power Supplies
Input Stage Supply Voltage VCC1, VEE1 - ±5 - ±18 V
Output Stage Supply Voltage VCC2, VEE2 - ±5 - ±18 V
Input (A1) & Output Stage (A2) Supply Current - - 5 10 mA
Power Supply Rejection Ratio, PSRR - - 80 100 dB
