SURFBOARDS
R
THE BREADBOARDING MEDIUM FOR SURFACE MOUNT TM
CAPITAL ADVANCED TECHNOLOGIES, INC.
CAROL STREAM, INLINOIS. USA PHONE 630-690-1696 FAX 630-690-2498
WWW.CapitalAdanced.Com
MADE
IN
USA
33000 SERIES APPLICATION SPECIFIC ADAPTERS
33406
MODEL
FIG. MM IN. NOTE:
A
15.24 .600
BOARD WIDTH +- .5mm .020in.
B
8.89 .350
BOARD HEIGHT +-.5mm .020in.
C
2.54 .100
SIP PIN SPACE +-.20mm .008in.
D
1.95 .077 PAD CENTERLINE
E .5
.020
DEVICE LEAD PITCH
F
1.7 .067 PAD LENGTH
G
.3 .012 PAD WIDTH
I
3.3 .130
MAX LEAD WIDTH
J
1.0 .039
TYPICAL LEAD WIDTH
P
3.3 .130
LENGTH FROM SHOULDER +-.5mm .020in.
S
1.57 .062 PIN SHOULDER HEGHT
W
.5 .020 PIN WIDTH
H
.25 .010 GAP
J1
1.6 .063
VARIATION LEAD WIDTH
MOUNTING PADS ARE OVERSIZED IN LENGTH TO
ACCEPT A WIDER RANGE OF DEVICE WIDTHS AND
TOLERANCES AND TO PERMIT HAND SOLDERING.
SEE WEBSITE FOR SOLDERING SUGGESTIONS
SINGLE-IN-LINE ( SIP ) PINS
ON .100 in. CENTERS
PAD SET
EXAMPLE DEVICE ( J )
AND MAX WIDTH ( I )
TOLERANCES: If not noted are +- 20%. Nominal values are given. Controlling
unit is Millimeters. Slight Variations due to manufacturing process can occur.
ACCEPTS
6 LEAD .5 mm PITCH DEVICES
IDS33406
ALWAYS CONSULT DEVICE DATA SHEET TO INSURE PROPER FIT
BOARD SPECIFICATIONS
BOARD MATERIAL: .8mm, +-.13mm .031in+-..005 in.
Thick G-10 FR-4 Glass Epoxy or equivalent.
CIRCUITS: 1 oz. Copper with RoHS compliant Lead Free
solder coating. Patten Position on board +- .5mm .020in.
RoHS
Compliant
EC 2002/95
Copyright 2011 by Capital Advanced Technologies, Inc. All rights reserved. Surfboards is a registered trademark of Capital Advanced Technologies, Inc. The Breadboarding medium for surface mount, and the Leaf Circuit Logo
are trademarks of Capital Advanced Technologies, Inc. All other trademarks are the property of their respective owners. Specifications, availability, and price is subject to change without notice. All information given is believed to
be accurate but is not guaranteed. The user of information given or products represented by such information is responsible for determining the suitability of said information or products for a given purpose. No inducement is
intended or permission granted for infringement of any patent or unauthorized use of any intellectual property of Capital Advanced Technologies or others.
(PARTIAL LISTING)
SC-75-6, SC-89,
SOT-66, SOT-563, SOT-666
KEC
TES6
NATIONAL
LLP COL 2x2x0.6mm 6LD
MAXIM
6L UDFN 1.5x1.0x0.75mm
ON SEMI
UDFN6 1.45x1.0,0.5P, ULLGA6 1.45x1.0,0.5P
PANASONIC
SSMini6-F1, SSMini6-F2, WSSMini6-F1
RENESAS
SMFPAK-6
ROHM
WEMT6, EMT6
TEXAS INST.
DRL (R-PDSO-N6), DRY (R-PDSO-N6), DSE (R-PDSO-N6)
TOSHIBA
ES6
DEVICE LEAD WIDTHS 1.0, 1.5, 1.6, 1.65, To Max 3.3
DRAWINGS
NOT TO
SCALE
REV A- 10-2011
